Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connector and black memory chips

A-Tech

A-Tech 4GB DDR2 667MHz SODIMM PC2-5300 CL5 1.8V 200-Pin Laptop RAM

SKU CH-JJET-RVT0X

4GB DDR2 667MHz SODIMM laptop memory upgrade with CL5 latency and 1.8V operation for compatible notebooks

  • Capacity4GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 4GB

Speed DDR2 667 (PC2 5300)

CAS Latency CL5

  • 4GB capacity expands multitasking headroom for older laptops
  • DDR2 667MHz PC2-5300 speed matches legacy system specs
  • 200-pin SO-DIMM form factor fits standard DDR2 notebook slots
  • CL5 latency at 1.8V delivers stable DDR2 operation
  • Rigorously tested modules ensure reliable performance upgrades

A-Tech 4GB DDR2 667MHz SODIMM

This A-Tech module adds 4GB of DDR2 memory to compatible laptops, notebooks and all-in-one systems. It uses the 200-pin SO-DIMM form factor and runs at 667MHz with CL5 latency. The stick is non-ECC, unbuffered and operates at the standard 1.8V. It suits owners of older DDR2 platforms who want a straightforward capacity increase.

Capacity and headroom for DDR2 platforms

A single 4GB stick fills one slot and raises the total memory available for everyday applications and multitasking. Performance scales with the DDR2 667MHz bus, so workloads that fit within this bandwidth see snappier response. Systems limited to lower densities or fewer slots will hit a ceiling here; the module cannot exceed the platform's maximum supported memory per slot or total capacity.

Thermals noise and power draw in normal use

Standard 1.8V DDR2 SO-DIMMs draw modest power and run passively without a fan. The module produces no audible noise and adds minimal heat inside the chassis. Typical operation stays within the thermal envelope of the laptop's existing cooling design.

Priekšrocības

  • 4GB capacity expands multitasking headroom for older laptops
  • DDR2 667MHz PC2-5300 speed matches legacy system specs
  • 200-pin SO-DIMM form factor fits standard DDR2 notebook slots
  • CL5 latency at 1.8V delivers stable DDR2 operation
  • Rigorously tested modules ensure reliable performance upgrades

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR2 Laptop Memory RAM
Capacity4GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will this 667 MHz DDR2 module work in a laptop that currently has slower DDR2 installed?

The module runs at 667 MHz and uses the standard 1.8 V DDR2 voltage; it will operate at the speed supported by your laptop's memory controller.

How can I confirm the module is recognised at the correct speed after installation?

Check the BIOS memory information or a system utility such as CPU-Z to verify the module reports 667 MHz (PC2-5300) and CL5 timings.

Does the package include anything besides the 4 GB 200-pin SO-DIMM?

Only the single 4 GB DDR2 667 MHz SO-DIMM is supplied; no additional cables, brackets or tools are included.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.