A-Tech 2GB DDR2 800MHz SODIMM 200-Pin CL6 1.8V Laptop RAM Kit
- 2GB (2 x 1GB)
- 200-Pin DDR2 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
4GB DDR2 667MHz SODIMM laptop memory upgrade with CL5 latency and 1.8V operation for compatible notebooks
Capacity 4GB
Speed DDR2 667 (PC2 5300)
This A-Tech module adds 4GB of DDR2 memory to compatible laptops, notebooks and all-in-one systems. It uses the 200-pin SO-DIMM form factor and runs at 667MHz with CL5 latency. The stick is non-ECC, unbuffered and operates at the standard 1.8V. It suits owners of older DDR2 platforms who want a straightforward capacity increase.
A single 4GB stick fills one slot and raises the total memory available for everyday applications and multitasking. Performance scales with the DDR2 667MHz bus, so workloads that fit within this bandwidth see snappier response. Systems limited to lower densities or fewer slots will hit a ceiling here; the module cannot exceed the platform's maximum supported memory per slot or total capacity.
Standard 1.8V DDR2 SO-DIMMs draw modest power and run passively without a fan. The module produces no audible noise and adds minimal heat inside the chassis. Typical operation stays within the thermal envelope of the laptop's existing cooling design.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Laptop Memory RAM |
| Capacity | 4GB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The module runs at 667 MHz and uses the standard 1.8 V DDR2 voltage; it will operate at the speed supported by your laptop's memory controller.
Check the BIOS memory information or a system utility such as CPU-Z to verify the module reports 667 MHz (PC2-5300) and CL5 timings.
Only the single 4 GB DDR2 667 MHz SO-DIMM is supplied; no additional cables, brackets or tools are included.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟