A-Tech 2GB DDR2 800MHz SODIMM PC2-6400 CL6 1.8V 200-Pin Laptop RAM
- 2GB
- 200-Pin DDR2 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
A 1GB DDR2 800MHz SO-DIMM module that upgrades compatible laptops with faster loading and smoother multitasking
Capacity 1GB
Speed DDR2 800 (PC2 6400)
This 1GB DDR2 SO-DIMM module from A-Tech is built for laptops, notebooks and all-in-one computers that use 200-pin DDR2 memory slots. It runs at 800MHz with a CL6 latency and the standard 1.8V DDR2 voltage, delivering a straightforward capacity increase for compatible systems.
The jump is worth it when your current DDR2 laptop has a free slot or can replace an existing stick with this 1GB PC2-6400 module to improve multitasking and reduce load times. It does not suit machines that require ECC, registered memory or a different DDR generation.
Verify that your laptop, notebook or all-in-one supports DDR2 SO-DIMM 200-pin non-ECC unbuffered memory at 1.8V and can accept a 1GB module at 800MHz. Confirm the maximum supported capacity per slot and the total number of available slots in your specific model.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Laptop Memory RAM |
| Capacity | 1GB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Yes, this module uses the standard 200-pin DDR2 SO-DIMM form factor required by laptops that accept PC2-6400 memory.
Align the notch on the module with the key in the slot, insert at an angle until the contacts are fully seated, then press down until the side clips lock.
No, 1.8V is the standard DDR2 voltage; the module runs at this level for its entire service life without maintenance.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟