A-Tech 2GB DDR2 800MHz SODIMM 200-Pin CL6 1.8V Laptop RAM Kit
- 2GB (2 x 1GB)
- 200-Pin DDR2 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
Dual-channel 8 GB DDR2 667 MHz kit with two 4 GB SO-DIMM modules for laptop upgrades
Capacity 8GB (2 x 4GB)
Speed DDR2 667 (PC2 5300)
This A-Tech kit supplies 8 GB of DDR2 memory as two matched 4 GB modules built to the PC2-5300 standard. It targets owners of legacy laptops, notebooks or all-in-one PCs that accept 200-pin DDR2 SO-DIMMs running at 667 MHz and 1.8 V.
The modules are unbuffered, non-ECC and rated CL5, matching the requirements of many DDR2-era mobile chipsets. Systems that demand registered or ECC memory, or that only support single-sided 2 GB modules, cannot use this kit.
The decisive detail is the 200-pin DDR2 SO-DIMM form factor operating at 667 MHz (PC2-5300) with 1.8 V CL5 timing; if the service manual for your machine lists that exact combination the kit will fit and run in dual-channel mode.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Laptop Memory RAM |
| Capacity | 8GB (2 x 4GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
This kit provides two 4 GB modules that run together in dual-channel mode. A single 8 GB DDR2 SO-DIMM does not exist, so the 2 x 4 GB kit is the only way to reach 8 GB on a 200-pin DDR2 platform.
The modules operate at 667 MHz with CL5 latency at 1.8 V, giving a peak transfer rate of PC2-5300. Real-world bandwidth will match the DDR2-667 specification your chipset supports.
PC2-5300 is the JEDEC standard name for DDR2-667. If your system supports a higher DDR2 grade, these modules will simply run at their rated 667 MHz instead of the board's maximum.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟