Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão

A-Tech

A-Tech 8GB (2x4GB) DDR2 667MHz SODIMM PC2-5300 CL5 1.8V 200-Pin Laptop RAM

SKU CH-SVSG-R9PG0

Dual-channel 8 GB DDR2 667 MHz kit with two 4 GB SO-DIMM modules for laptop upgrades

  • Capacity8GB (2 x 4GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCNo

Capacity 8GB (2 x 4GB)

Speed DDR2 667 (PC2 5300)

CAS Latency CL5

  • 8GB dual-channel kit expands multitasking headroom
  • DDR2 667 MHz (PC2-5300) matches legacy laptop slots
  • CL5 latency and 1.80V voltage meet DDR2 JEDEC spec
  • 200-pin SO-DIMM form factor fits compatible notebooks
  • Non-ECC unbuffered modules validated for AMD and Intel platforms

DDR2 667 MHz SO-DIMM kit for older laptops

This A-Tech kit supplies 8 GB of DDR2 memory as two matched 4 GB modules built to the PC2-5300 standard. It targets owners of legacy laptops, notebooks or all-in-one PCs that accept 200-pin DDR2 SO-DIMMs running at 667 MHz and 1.8 V.

Suitable for DDR2 platforms needing a dual-channel

The modules are unbuffered, non-ECC and rated CL5, matching the requirements of many DDR2-era mobile chipsets. Systems that demand registered or ECC memory, or that only support single-sided 2 GB modules, cannot use this kit.

Dual-channel 200-pin DDR2 667 MHz specification

The decisive detail is the 200-pin DDR2 SO-DIMM form factor operating at 667 MHz (PC2-5300) with 1.8 V CL5 timing; if the service manual for your machine lists that exact combination the kit will fit and run in dual-channel mode.

Pontos fortes

  • 8GB dual-channel kit expands multitasking headroom
  • DDR2 667 MHz (PC2-5300) matches legacy laptop slots
  • CL5 latency and 1.80V voltage meet DDR2 JEDEC spec
  • 200-pin SO-DIMM form factor fits compatible notebooks
  • Non-ECC unbuffered modules validated for AMD and Intel platforms

Especificações

BrandA-Tech
SeriesA-Tech DDR2 Laptop Memory RAM
Capacity8GB (2 x 4GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I buy this 8 GB kit or look for a single 8 GB module?

This kit provides two 4 GB modules that run together in dual-channel mode. A single 8 GB DDR2 SO-DIMM does not exist, so the 2 x 4 GB kit is the only way to reach 8 GB on a 200-pin DDR2 platform.

What does the 667 MHz rating actually deliver inside my laptop?

The modules operate at 667 MHz with CL5 latency at 1.8 V, giving a peak transfer rate of PC2-5300. Real-world bandwidth will match the DDR2-667 specification your chipset supports.

Will the PC2-5300 label limit speed on a faster DDR2 board?

PC2-5300 is the JEDEC standard name for DDR2-667. If your system supports a higher DDR2 grade, these modules will simply run at their rated 667 MHz instead of the board's maximum.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.