Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board with gold edge connectors and black memory chips, no heat spreader

A-Tech

A-Tech 4GB DDR3 1333 CL9 desktop RAM

SKU CH-5MCK-5R3ED

4GB DDR3 1333 CL9 desktop DIMM running at 1.5V for compatible G.Skill system upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you run more programs at once
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 CAS latency supports responsive desktop operation
  • 50V standard voltage works with typical DDR3 boards
  • 240-pin DIMM form factor fits standard desktop slots

A-Tech 4GB DDR3 1333 Desktop Module

This 4GB DDR3 DIMM runs at 1333MHz with CL9 latency and 1.50V operation. It is an unbuffered, non-ECC module built as a direct replacement for several G.Skill kits. The single stick suits desktop owners who need a straightforward capacity increase without changing voltage settings.

DDR3 1333 PC3-10600 Interface Limits

The DDR3 1333 standard caps data rates at 1333 MT/s and uses 240-pin DIMM connectors keyed for 1.5V signalling. Systems that only support lower DDR3 speeds will down-clock the module automatically. Boards requiring registered or ECC memory cannot use this unbuffered stick.

Replaces G.Skill F3-10666CL9 Series Kits

This module replaces G.Skill part numbers F3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL and F3-10666CL9T2-24GBRL. The upgrade is worth it when an exact-capacity match is needed to complete a dual-channel pair or to restore a failed stick in those kits.

Priekšrocības

  • 4GB capacity lets you run more programs at once
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 CAS latency supports responsive desktop operation
  • 50V standard voltage works with typical DDR3 boards
  • 240-pin DIMM form factor fits standard desktop slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL
Recommend UseCompatible Replacement for G.Skill F3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL

Jautājumi par šo preci

Is this 4 GB module the only capacity available or are larger kits offered?

The listing covers a single 4 GB stick; the compatible G.Skill part numbers reference 8 GB, 12 GB, 16 GB and 24 GB kits built from multiple modules.

What does the 1333 MHz rating mean for actual system performance?

The module runs at 1333 MHz with CL9 timing at 1.5 V, delivering standard DDR3 desktop bandwidth for everyday workloads.

Does the 240-pin DIMM fit every DDR3 motherboard?

It uses the standard 240-pin DDR3 DIMM form factor, so it installs in any desktop board with a DDR3 slot that accepts unbuffered non-ECC memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.