Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with gold edge connectors and black memory chips, no heat spreader

A-Tech

A-Tech 4GB DDR3 1333 CL9 desktop RAM

SKU CH-5MCK-5R3ED

4GB DDR3 1333 CL9 desktop DIMM running at 1.5V for compatible G.Skill system upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity lets you run more programs at once
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 CAS latency supports responsive desktop operation
  • 50V standard voltage works with typical DDR3 boards
  • 240-pin DIMM form factor fits standard desktop slots

A-Tech 4GB DDR3 1333 Desktop Module

This 4GB DDR3 DIMM runs at 1333MHz with CL9 latency and 1.50V operation. It is an unbuffered, non-ECC module built as a direct replacement for several G.Skill kits. The single stick suits desktop owners who need a straightforward capacity increase without changing voltage settings.

DDR3 1333 PC3-10600 Interface Limits

The DDR3 1333 standard caps data rates at 1333 MT/s and uses 240-pin DIMM connectors keyed for 1.5V signalling. Systems that only support lower DDR3 speeds will down-clock the module automatically. Boards requiring registered or ECC memory cannot use this unbuffered stick.

Replaces G.Skill F3-10666CL9 Series Kits

This module replaces G.Skill part numbers F3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL and F3-10666CL9T2-24GBRL. The upgrade is worth it when an exact-capacity match is needed to complete a dual-channel pair or to restore a failed stick in those kits.

Kohokohdat

  • 4GB capacity lets you run more programs at once
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 CAS latency supports responsive desktop operation
  • 50V standard voltage works with typical DDR3 boards
  • 240-pin DIMM form factor fits standard desktop slots

Tekniset tiedot

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL
Recommend UseCompatible Replacement for G.Skill F3-10666CL9D-8GBXL, F3-10666CL9Q-16GBRL, F3-10666CL9S-4GBRL, F3-10666CL9T-12GBRL, F3-10666CL9T2-24GBRL

Kysymyksiä tästä tuotteesta

Is this 4 GB module the only capacity available or are larger kits offered?

The listing covers a single 4 GB stick; the compatible G.Skill part numbers reference 8 GB, 12 GB, 16 GB and 24 GB kits built from multiple modules.

What does the 1333 MHz rating mean for actual system performance?

The module runs at 1333 MHz with CL9 timing at 1.5 V, delivering standard DDR3 desktop bandwidth for everyday workloads.

Does the 240-pin DIMM fit every DDR3 motherboard?

It uses the standard 240-pin DDR3 DIMM form factor, so it installs in any desktop board with a DDR3 slot that accepts unbuffered non-ECC memory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.