NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR3 1333MHz DIMM module replaces HP part numbers 497158-D88, 585157-001, BU970AV, VH638AA and others for desktop memory upgrades
This single 4GB DDR3 DIMM runs at 1333 MHz with CL9 latency and 1.50 V standard voltage. It is an unbuffered, non-ECC module built with major-brand chips. The 240-pin form factor fits desktop systems that specify PC3-10600 memory.
The DDR3 1333 standard tops out at 1333 MT/s, so this module cannot exceed that data rate even if the platform supports higher speeds. Bandwidth is capped at the PC3-10600 rating, and the 1.50 V supply is fixed for DDR3 operation. Motherboard chipsets that only recognise slower DDR3 grades will down-clock the module automatically.
A single 4 GB stick adds modest capacity for everyday desktop workloads such as web browsing, office applications and light multitasking. Systems with multiple DIMM slots can install additional identical modules to increase total memory, but a lone 4 GB module will reach its limit quickly with modern multitasking or memory-intensive applications.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
This item is a single 4GB stick; adding a second identical module later will let the board run in dual-channel mode if the motherboard supports it.
The module runs at DDR3 1333 with CL9 latency at 1.5V, giving a peak transfer rate of PC3-10600 for everyday multitasking and office workloads.
The 240-pin unbuffered DIMM slot caps speed to the DDR3 1333 standard, so the module operates at its rated 1333 MHz without overclocking headroom.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?