NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
4GB DDR3 1333MHz DIMM module replaces HP part numbers 497158-D88, 585157-001, BU970AV, VH638AA and others for desktop memory upgrades
This single 4GB DDR3 DIMM runs at 1333 MHz with CL9 latency and 1.50 V standard voltage. It is an unbuffered, non-ECC module built with major-brand chips. The 240-pin form factor fits desktop systems that specify PC3-10600 memory.
The DDR3 1333 standard tops out at 1333 MT/s, so this module cannot exceed that data rate even if the platform supports higher speeds. Bandwidth is capped at the PC3-10600 rating, and the 1.50 V supply is fixed for DDR3 operation. Motherboard chipsets that only recognise slower DDR3 grades will down-clock the module automatically.
A single 4 GB stick adds modest capacity for everyday desktop workloads such as web browsing, office applications and light multitasking. Systems with multiple DIMM slots can install additional identical modules to increase total memory, but a lone 4 GB module will reach its limit quickly with modern multitasking or memory-intensive applications.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
This item is a single 4GB stick; adding a second identical module later will let the board run in dual-channel mode if the motherboard supports it.
The module runs at DDR3 1333 with CL9 latency at 1.5V, giving a peak transfer rate of PC3-10600 for everyday multitasking and office workloads.
The 240-pin unbuffered DIMM slot caps speed to the DDR3 1333 standard, so the module operates at its rated 1333 MHz without overclocking headroom.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?