OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
A 4 GB DDR3 1333 MHz SO-DIMM module for compatible 2010–2011 iMac, MacBook Pro and Mac mini models
This module is a 4GB DDR3 1333 MHz (PC3-10600) SO-DIMM with 204 pins, unbuffered, non-ECC, 1.50V, 2Rx8 organisation, built with major-brand chips. It is engineered specifically for the Apple systems listed in the compatibility data.
Buyers with MacBook Pro 13-inch, 15-inch or 17-inch from Early or Late 2011, iMac 21.5-inch or 27-inch from Mid 2010 or Mid/Late 2011, or Mac mini Mid 2011 can install this module directly. Anyone whose Mac requires a different DDR generation, a different pin count, registered or ECC memory, or a voltage other than 1.50V will not be able to use this part.
The memory operates at DDR3 1333 MHz, labelled PC3-10600, which is the exact speed specification the supported Macs expect. If a system demands a higher or lower DDR3 data rate, this module will not match the required timing and should not be purchased.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Apple Mac RAM Memory Upgrades |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Yes, the module is a 204-pin DDR3 SODIMM specified for MacBook Pro 13-inch Early and Late 2011 models including A1278 EMC 2419 and 2555.
Insert the module at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches on the PCB.
No firmware updates are required for DDR3 SODIMMs and this module has no heat spreader to replace.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?