OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 4 GB DDR3 1333 MHz SO-DIMM module for compatible 2010–2011 iMac, MacBook Pro and Mac mini models
This module is a 4GB DDR3 1333 MHz (PC3-10600) SO-DIMM with 204 pins, unbuffered, non-ECC, 1.50V, 2Rx8 organisation, built with major-brand chips. It is engineered specifically for the Apple systems listed in the compatibility data.
Buyers with MacBook Pro 13-inch, 15-inch or 17-inch from Early or Late 2011, iMac 21.5-inch or 27-inch from Mid 2010 or Mid/Late 2011, or Mac mini Mid 2011 can install this module directly. Anyone whose Mac requires a different DDR generation, a different pin count, registered or ECC memory, or a voltage other than 1.50V will not be able to use this part.
The memory operates at DDR3 1333 MHz, labelled PC3-10600, which is the exact speed specification the supported Macs expect. If a system demands a higher or lower DDR3 data rate, this module will not match the required timing and should not be purchased.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Apple Mac RAM Memory Upgrades |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Yes, the module is a 204-pin DDR3 SODIMM specified for MacBook Pro 13-inch Early and Late 2011 models including A1278 EMC 2419 and 2555.
Insert the module at an angle until the gold contacts disappear, then press down firmly until both side clips click into the notches on the PCB.
No firmware updates are required for DDR3 SODIMMs and this module has no heat spreader to replace.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?