BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278311BTC
Krājumā
A-Tech
A-Tech 4GB DDR4 2400MHz CL17 260-Pin SODIMM Micron MTA4ATF51264HZ-2G3 Compatible Laptop RAM
4GB DDR4 2400MHz CL17 260-pin SODIMM module for laptop memory upgrades at 1.2V
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- Boosts system responsiveness with 4GB DDR4 2400MHz CL17 module
- Fits standard laptop slots using 260-pin SODIMM form factor
- Runs efficiently at 1.20V standard DDR4 voltage
- Compatible replacement for Micron MTA4ATF51264HZ-2G3 series modules
- Tested for reliable performance in AMD and Intel compatible systems
4GB DDR4 2400MHz SODIMM for Laptop Upgrade
This 4GB DDR4 SODIMM module runs at 2400MHz with CL17 latency and 1.20V operation. It fits laptops, notebooks and all-in-one systems that accept 260-pin DDR4 memory. The module is unbuffered and non-ECC, matching the Micron MTA4ATF51264HZ-2G3 series specifications.
Tested Reliability and Compatibility List
Every module undergoes quality assurance testing before shipment to verify dependable performance. The part replaces six Micron part numbers including MTA4ATF51264HZ-2G3B1 and MTA4ATF5126HZ-2G3B1. Buyers should confirm their system supports DDR4 2400MHz SO-DIMM memory before ordering.
260-Pin Gold-Edge Connector and Standard Voltage
The 260-pin edge connector slots directly into standard DDR4 SODIMM sockets without adapters. Operation at 1.20V follows the DDR4 standard voltage, so no manual voltage adjustment is required. Systems limited to lower capacities or older DDR generations cannot use this module.
Priekšrocības
- Boosts system responsiveness with 4GB DDR4 2400MHz CL17 module
- Fits standard laptop slots using 260-pin SODIMM form factor
- Runs efficiently at 1.20V standard DDR4 voltage
- Compatible replacement for Micron MTA4ATF51264HZ-2G3 series modules
- Tested for reliable performance in AMD and Intel compatible systems
Specifikācijas
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Jautājumi par šo preci
Will the 4 GB DDR4 2400 MHz CL17 SODIMM need any firmware updates or periodic re-seating after installation?
No firmware updates or scheduled re-seating are required; the module is a standard 1.2 V unbuffered DDR4 SODIMM that runs at its rated 2400 MHz CL17 once seated in a compatible 260-pin slot.
What limit appears first when the module runs at full 2400 MHz speed continuously?
The JEDEC-defined 1.2 V voltage ceiling and CL17 latency are the fixed electrical limits; sustained operation stays within those parameters as long as the laptop’s memory controller and cooling keep the slot within normal operating temperature.
How much extra heat or fan noise does the 1.2 V DDR4 SODIMM add during all-day use?
At the standard 1.2 V DDR4 voltage the module draws minimal power, so it adds negligible heat and does not cause audible fan-speed changes in typical laptop cooling systems.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
