我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 4GB DDR4 2400MHz CL17 260-Pin SODIMM Micron MTA4ATF51264HZ-2G3 Compatible Laptop RAM

SKU CH-1MWD-9P72Y

4GB DDR4 2400MHz CL17 260-pin SODIMM module for laptop memory upgrades at 1.2V

  • Capacity4GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2400MHz CL17 module
  • Fits standard laptop slots using 260-pin SODIMM form factor
  • Runs efficiently at 1.20V standard DDR4 voltage
  • Compatible replacement for Micron MTA4ATF51264HZ-2G3 series modules
  • Tested for reliable performance in AMD and Intel compatible systems

4GB DDR4 2400MHz SODIMM for Laptop Upgrade

This 4GB DDR4 SODIMM module runs at 2400MHz with CL17 latency and 1.20V operation. It fits laptops, notebooks and all-in-one systems that accept 260-pin DDR4 memory. The module is unbuffered and non-ECC, matching the Micron MTA4ATF51264HZ-2G3 series specifications.

Tested Reliability and Compatibility List

Every module undergoes quality assurance testing before shipment to verify dependable performance. The part replaces six Micron part numbers including MTA4ATF51264HZ-2G3B1 and MTA4ATF5126HZ-2G3B1. Buyers should confirm their system supports DDR4 2400MHz SO-DIMM memory before ordering.

260-Pin Gold-Edge Connector and Standard Voltage

The 260-pin edge connector slots directly into standard DDR4 SODIMM sockets without adapters. Operation at 1.20V follows the DDR4 standard voltage, so no manual voltage adjustment is required. Systems limited to lower capacities or older DDR generations cannot use this module.

商品特色

  • Boosts system responsiveness with 4GB DDR4 2400MHz CL17 module
  • Fits standard laptop slots using 260-pin SODIMM form factor
  • Runs efficiently at 1.20V standard DDR4 voltage
  • Compatible replacement for Micron MTA4ATF51264HZ-2G3 series modules
  • Tested for reliable performance in AMD and Intel compatible systems

商品規格

BrandA-Tech
Capacity4GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

商品問答

Will the 4 GB DDR4 2400 MHz CL17 SODIMM need any firmware updates or periodic re-seating after installation?

No firmware updates or scheduled re-seating are required; the module is a standard 1.2 V unbuffered DDR4 SODIMM that runs at its rated 2400 MHz CL17 once seated in a compatible 260-pin slot.

What limit appears first when the module runs at full 2400 MHz speed continuously?

The JEDEC-defined 1.2 V voltage ceiling and CL17 latency are the fixed electrical limits; sustained operation stays within those parameters as long as the laptop’s memory controller and cooling keep the slot within normal operating temperature.

How much extra heat or fan noise does the 1.2 V DDR4 SODIMM add during all-day use?

At the standard 1.2 V DDR4 voltage the module draws minimal power, so it adds negligible heat and does not cause audible fan-speed changes in typical laptop cooling systems.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。