NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR4 2666MHz SODIMM laptop memory with CL19 latency and 1.2V operation
This 4GB DDR4 2666MHz SODIMM module is built for laptop, notebook, and all-in-one owners who need a direct replacement for Micron MTA4ATF51264HZ-2G6 or MTA4ATF51264HZ-2G6J1 parts. It installs in a standard 260-pin slot and runs at the standard 1.2V voltage. The CL19 unbuffered non-ECC design matches the original specification for drop-in compatibility.
Operating at 1.2V, the module draws minimal power and produces negligible heat without a heat spreader. Passive cooling from the laptop chassis is sufficient for normal workloads. The low voltage keeps fan noise unchanged during everyday multitasking and browsing sessions.
This kit replaces a failed or missing Micron MTA4ATF51264HZ-2G6 or MTA4ATF51264HZ-2G6J1 stick with identical capacity, speed, latency, and pin-out. The upgrade is worth it when your system requires a matched 4GB DDR4 2666 module to restore dual-channel performance or to meet the vendor-qualified part list. It is not for buyers who need higher capacity than 4GB or a different DDR generation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
| Recommend Use | Compatible Replacement for Micron MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
Align the notch on the module with the slot key, insert at a 30-degree angle, then press down firmly until both side clips click — the step people miss is not pushing far enough for the clips to engage.
No routine maintenance is required; the module has no heat spreader or moving parts, and it only needs replacement if a memory test reports errors or you upgrade capacity.
The CL19 latency at 2666MHz is the first bottleneck; bandwidth and voltage remain stable, but tighter-timed or faster-rated memory would reduce wait states under continuous load.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?