NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
4GB DDR4 2666MHz SODIMM laptop memory with CL19 latency and 1.2V operation
This 4GB DDR4 2666MHz SODIMM module is built for laptop, notebook, and all-in-one owners who need a direct replacement for Micron MTA4ATF51264HZ-2G6 or MTA4ATF51264HZ-2G6J1 parts. It installs in a standard 260-pin slot and runs at the standard 1.2V voltage. The CL19 unbuffered non-ECC design matches the original specification for drop-in compatibility.
Operating at 1.2V, the module draws minimal power and produces negligible heat without a heat spreader. Passive cooling from the laptop chassis is sufficient for normal workloads. The low voltage keeps fan noise unchanged during everyday multitasking and browsing sessions.
This kit replaces a failed or missing Micron MTA4ATF51264HZ-2G6 or MTA4ATF51264HZ-2G6J1 stick with identical capacity, speed, latency, and pin-out. The upgrade is worth it when your system requires a matched 4GB DDR4 2666 module to restore dual-channel performance or to meet the vendor-qualified part list. It is not for buyers who need higher capacity than 4GB or a different DDR generation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Micron |
| Model | MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
| Recommend Use | Compatible Replacement for Micron MTA4ATF51264HZ-2G6, MTA4ATF51264HZ-2G6J1 |
Align the notch on the module with the slot key, insert at a 30-degree angle, then press down firmly until both side clips click — the step people miss is not pushing far enough for the clips to engage.
No routine maintenance is required; the module has no heat spreader or moving parts, and it only needs replacement if a memory test reports errors or you upgrade capacity.
The CL19 latency at 2666MHz is the first bottleneck; bandwidth and voltage remain stable, but tighter-timed or faster-rated memory would reduce wait states under continuous load.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?