Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 64GB 8x8GB DDR3 1333 ECC RDIMM 2Rx4 1.5V Server RAM

SKU CH-ANBP-FFMT2

Eight 8 GB DDR3 1333 MHz ECC registered DIMMs totalling 64 GB for servers and workstations

  • Capacity64GB (8 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 64 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors automatically
  • 5 V standard voltage ensures stable operation in compatible systems
  • 240-pin dual-rank modules fit approved DDR3 server and workstation slots

64 GB DDR3 ECC RDIMM kit

This A-Tech kit supplies 64 GB of DDR3 1333 MHz registered ECC memory across eight 8 GB modules. It is built for servers and workstations that require 240-pin DDR3 RDIMMs with dual-rank x4 organisation and standard 1.5 V operation. The modules carry CL9 latency and are tested for dependable operation in compatible enterprise platforms.

For DDR3 registered-ECC platforms only

The kit suits administrators upgrading or populating DDR3-era servers and workstations that explicitly support registered ECC DIMMs. It will not work in desktop or laptop computers, nor in systems that accept only unbuffered or non-ECC memory. Buyers needing higher frequencies, lower voltages, or different form factors should look elsewhere.

Eight-module population for multi-channel servers

Eight 240-pin DIMMs fill multiple memory channels on supported dual-socket or quad-socket boards, maximising bandwidth and capacity per processor. Registered buffering reduces electrical load on the memory controller, freeing headroom for large memory configurations. Verify the platform's qualified vendor list and population rules before installation.

Priekšrocības

  • 64 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors automatically
  • 5 V standard voltage ensures stable operation in compatible systems
  • 240-pin dual-rank modules fit approved DDR3 server and workstation slots

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity64GB (8 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does my server need DDR3 240-pin registered DIMM slots to use this 64 GB kit?

Yes, the modules are DDR3 1333 MHz 240-pin ECC RDIMMs and only work in servers or workstations that accept registered DDR3 memory.

Can I mix these 2Rx4 modules with existing single-rank DDR3 RDIMMs in the same system?

Mixing dual-rank and single-rank registered DDR3 DIMMs is possible if the platform supports it, but population rules vary by server model so consult the system manual first.

How can I verify the kit is running at 1333 MHz with ECC active after installation?

Check the BIOS memory information or use an OS tool such as dmidecode to confirm each module shows 1333 MT/s, 1.5 V, ECC enabled and registered operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.