Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 64GB 8x8GB DDR3 1333 ECC RDIMM 2Rx4 1.5V Server RAM

SKU CH-ANBP-FFMT2

Eight 8 GB DDR3 1333 MHz ECC registered DIMMs totalling 64 GB for servers and workstations

  • Capacity64GB (8 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 64GB (8 x 8GB)

Speed DDR3 1333 (PC3 10600)

  • 64 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors automatically
  • 5 V standard voltage ensures stable operation in compatible systems
  • 240-pin dual-rank modules fit approved DDR3 server and workstation slots

64 GB DDR3 ECC RDIMM kit

This A-Tech kit supplies 64 GB of DDR3 1333 MHz registered ECC memory across eight 8 GB modules. It is built for servers and workstations that require 240-pin DDR3 RDIMMs with dual-rank x4 organisation and standard 1.5 V operation. The modules carry CL9 latency and are tested for dependable operation in compatible enterprise platforms.

For DDR3 registered-ECC platforms only

The kit suits administrators upgrading or populating DDR3-era servers and workstations that explicitly support registered ECC DIMMs. It will not work in desktop or laptop computers, nor in systems that accept only unbuffered or non-ECC memory. Buyers needing higher frequencies, lower voltages, or different form factors should look elsewhere.

Eight-module population for multi-channel servers

Eight 240-pin DIMMs fill multiple memory channels on supported dual-socket or quad-socket boards, maximising bandwidth and capacity per processor. Registered buffering reduces electrical load on the memory controller, freeing headroom for large memory configurations. Verify the platform's qualified vendor list and population rules before installation.

Pluspunten

  • 64 GB kit expands server memory capacity for heavier workloads
  • DDR3 1333 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors automatically
  • 5 V standard voltage ensures stable operation in compatible systems
  • 240-pin dual-rank modules fit approved DDR3 server and workstation slots

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-10600R
Capacity64GB (8 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does my server need DDR3 240-pin registered DIMM slots to use this 64 GB kit?

Yes, the modules are DDR3 1333 MHz 240-pin ECC RDIMMs and only work in servers or workstations that accept registered DDR3 memory.

Can I mix these 2Rx4 modules with existing single-rank DDR3 RDIMMs in the same system?

Mixing dual-rank and single-rank registered DDR3 DIMMs is possible if the platform supports it, but population rules vary by server model so consult the system manual first.

How can I verify the kit is running at 1333 MHz with ECC active after installation?

Check the BIOS memory information or use an OS tool such as dmidecode to confirm each module shows 1333 MT/s, 1.5 V, ECC enabled and registered operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.