NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
8 GB DDR3 1600 MHz ECC unbuffered DIMM with CL11 latency and 1.5 V operation for Dell A6996784 servers
This 8 GB DDR3 ECC UDIMM module runs at 1600 MHz with CL11 latency and 1.50 V operation. It uses a 240-pin form factor and 2Rx8 rank organisation for compatible Dell systems. The unbuffered design suits workstations and servers that require error-correcting memory without registered signalling.
ECC circuitry detects and corrects single-bit errors during continuous operation, preserving data integrity under long-running server loads. The major-brand chipset and 1.5 V standard voltage maintain stable timing across extended sessions. Quality assurance testing validates reliability for environments where uptime matters more than peak burst speed.
The PC3-12800 rating defines the maximum bandwidth available on the DDR3 1600 bus, capping throughput regardless of module capacity. Unbuffered topology restricts the number of modules a memory controller can address compared with registered alternatives. Builders needing larger total memory or higher frequencies must move to a newer memory generation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell |
| Model | A6996784 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | A6996784 |
The module operates at the standard DDR3 voltage of 1.5V with a CL11 latency, typical for unbuffered ECC DIMMs in 24/7 server environments.
This 240-pin DDR3 ECC UDIMM is built as a direct replacement for Dell part A6996784; verify your system's qualified-vendor list before installing.
Mixing ranks, speeds or latencies can cause instability; for best results populate all channels with identical 1600MHz CL11 2Rx8 modules.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?