NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
8 GB DDR3 1600 MHz ECC unbuffered DIMM with CL11 latency and 1.5 V operation for Dell A6996784 servers
This 8 GB DDR3 ECC UDIMM module runs at 1600 MHz with CL11 latency and 1.50 V operation. It uses a 240-pin form factor and 2Rx8 rank organisation for compatible Dell systems. The unbuffered design suits workstations and servers that require error-correcting memory without registered signalling.
ECC circuitry detects and corrects single-bit errors during continuous operation, preserving data integrity under long-running server loads. The major-brand chipset and 1.5 V standard voltage maintain stable timing across extended sessions. Quality assurance testing validates reliability for environments where uptime matters more than peak burst speed.
The PC3-12800 rating defines the maximum bandwidth available on the DDR3 1600 bus, capping throughput regardless of module capacity. Unbuffered topology restricts the number of modules a memory controller can address compared with registered alternatives. Builders needing larger total memory or higher frequencies must move to a newer memory generation.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell |
| Model | A6996784 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | A6996784 |
The module operates at the standard DDR3 voltage of 1.5V with a CL11 latency, typical for unbuffered ECC DIMMs in 24/7 server environments.
This 240-pin DDR3 ECC UDIMM is built as a direct replacement for Dell part A6996784; verify your system's qualified-vendor list before installing.
Mixing ranks, speeds or latencies can cause instability; for best results populate all channels with identical 1600MHz CL11 2Rx8 modules.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?