Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR3 1866 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-JX2W-R7KJA

8GB DDR3 1866 ECC registered DIMM with CL13 latency, 1.5V operation, and 240-pin dual-rank design for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 8GB

  • ECC protection detects and corrects single-bit errors for data integrity
  • Registered design reduces electrical load for stable server operation
  • 1866 MHz DDR3 speed with CL13 latency accelerates memory bandwidth
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server and workstation slots

Server DDR3 ECC RDIMM

This 8 GB DDR3 1866 MHz registered ECC module is built for servers and workstations that require error-correcting registered memory. It operates at 1.5 V with a CL13 latency and uses a dual-rank x4 organisation on a 240-pin DIMM form factor.

Registered DIMM compatibility

The stick fits only DDR3 server or workstation platforms that support registered ECC RDIMMs; it will not work in desktop or laptop systems. Each module occupies one DIMM slot and follows the platform's channel population rules, leaving remaining slots available for further capacity expansion.

Standard voltage thermals

Running at the standard 1.5 V DDR3 voltage, the module draws typical registered DIMM power without needing extra cooling beyond normal server airflow. The registered buffer adds negligible latency while maintaining signal integrity under sustained workloads.

Priekšrocības

  • ECC protection detects and corrects single-bit errors for data integrity
  • Registered design reduces electrical load for stable server operation
  • 1866 MHz DDR3 speed with CL13 latency accelerates memory bandwidth
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server and workstation slots

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-14900R
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How does the CL13 latency affect performance under sustained server workloads?

CL13 indicates a 13-cycle CAS latency at 1866 MHz, which determines the minimum delay before data becomes available during continuous read or write operations.

What is the power draw and thermal output when this module runs continuously at 1.5 V?

The module operates at the standard DDR3 voltage of 1.5 V, and registered DIMMs of this type typically draw only a few watts each, producing minimal additional heat inside a server chassis.

Which motherboard slot and chipset features are required for this 240-pin registered ECC module to function?

A server or workstation motherboard with DDR3 RDIMM slots, 240-pin DIMM sockets, and a chipset that supports registered ECC memory is required; desktop and laptop boards will not accept this module.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.