Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR3 1866 ECC RDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-MCF0-RCPNQ

Adds 8 GB of DDR3 1866 ECC registered memory to compatible servers and workstations

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 8GB

  • 8 GB capacity expands server memory for heavier workloads
  • DDR3 1866 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Server Memory Module

This 8 GB DDR3 1866 MHz ECC RDIMM is built for servers and workstations that require registered memory with error correction. It operates at the standard DDR3 voltage of 1.5 V and uses a 240-pin DIMM form factor. The module is not compatible with desktop or laptop computers.

Registered Dual-Rank Design

The 2Rx8 dual-rank organisation and registered buffer help stabilise the memory bus in multi-module configurations typical of server boards. Major-brand chips are used throughout and each stick undergoes quality-assurance testing before shipment. The 240-pin connector fits only DDR3 RDIMM slots keyed for registered memory.

Standard Voltage Operation

Running at 1.50 V with a CAS latency of CL13, the module draws normal DDR3 power without requiring elevated voltage settings. Error-correcting code and the registered interface add minimal overhead while protecting data integrity under sustained workloads. Thermal output remains within typical DDR3 limits for passively cooled server chassis.

Priekšrocības

  • 8 GB capacity expands server memory for heavier workloads
  • DDR3 1866 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-14900R
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What speed does the DDR3 1866 PC3-14900R standard cap at in practice?

The module runs at 1866 MHz with a PC3-14900R rating and CL13 latency, so the bus transfers data at that rate when the server platform supports it.

What slot and physical clearance does this 240-pin RDIMM need?

It fits a standard DDR3 240-pin DIMM socket; the registered design adds a small register chip, so verify the motherboard has enough height clearance for full-height RDIMMs.

How is the module installed and what step is often missed?

Power down, open the chassis, align the notch with the key in the 240-pin slot, press firmly until both latches click, then confirm the system BIOS recognises the ECC registered capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.