Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR3 1866 ECC RDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-MCF0-RCPNQ

Adds 8 GB of DDR3 1866 ECC registered memory to compatible servers and workstations

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 8GB

  • 8 GB capacity expands server memory for heavier workloads
  • DDR3 1866 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Server Memory Module

This 8 GB DDR3 1866 MHz ECC RDIMM is built for servers and workstations that require registered memory with error correction. It operates at the standard DDR3 voltage of 1.5 V and uses a 240-pin DIMM form factor. The module is not compatible with desktop or laptop computers.

Registered Dual-Rank Design

The 2Rx8 dual-rank organisation and registered buffer help stabilise the memory bus in multi-module configurations typical of server boards. Major-brand chips are used throughout and each stick undergoes quality-assurance testing before shipment. The 240-pin connector fits only DDR3 RDIMM slots keyed for registered memory.

Standard Voltage Operation

Running at 1.50 V with a CAS latency of CL13, the module draws normal DDR3 power without requiring elevated voltage settings. Error-correcting code and the registered interface add minimal overhead while protecting data integrity under sustained workloads. Thermal output remains within typical DDR3 limits for passively cooled server chassis.

Pluspunten

  • 8 GB capacity expands server memory for heavier workloads
  • DDR3 1866 MHz speed accelerates data transfer rates
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank layout increases memory density per slot
  • 5 V standard voltage ensures broad DDR3 platform compatibility

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC3-14900R
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What speed does the DDR3 1866 PC3-14900R standard cap at in practice?

The module runs at 1866 MHz with a PC3-14900R rating and CL13 latency, so the bus transfers data at that rate when the server platform supports it.

What slot and physical clearance does this 240-pin RDIMM need?

It fits a standard DDR3 240-pin DIMM socket; the registered design adds a small register chip, so verify the motherboard has enough height clearance for full-height RDIMMs.

How is the module installed and what step is often missed?

Power down, open the chassis, align the notch with the key in the 240-pin slot, press firmly until both latches click, then confirm the system BIOS recognises the ECC registered capacity.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.