BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278185BTC
Krājumā
A-Tech
A-Tech 8GB DDR3L 1600MHz PC3L-12800 204-Pin SODIMM 1.35V CL11 Laptop RAM
8GB DDR3L SODIMM replacement for Kingston HX316LS9IBK2/16 KAS-N3CL/8G KCP3L16SD8/8 KN2M64-ETF KTA-MB1600L/8G KTL-TP3CL/8G MSI16D3LS1KBG/8G at 1600 MHz 1.35V CL11
- Capacity8GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- 8GB capacity adds headroom for multitasking and large files
- DDR3L 1600MHz speed delivers fast data transfer rates
- 35V low-voltage operation reduces power draw and heat
- 204-pin SO-DIMM form factor fits standard laptop memory slots
- CL11 latency timing supports responsive system performance
8GB DDR3L 1600MHz Laptop SODIMM
This 8GB module uses 204-pin DDR3L technology at 1600MHz with CL11 latency and 1.35V operation. It is built for laptops, notebooks and all-in-one systems that accept low-voltage DDR3 SO-DIMM memory. The unbuffered, non-ECC design fits standard consumer platforms from both AMD and Intel.
Upgraders replacing Kingston DDR3L modules
The part matches Kingston references such as KTL-TP3CL/8G, KTA-MB1600L/8G and KCP3L16SD8/8, making it a direct swap for those specific kits. Systems that require ECC, registered DIMMs, or voltages other than 1.35V cannot use this module. Buyers needing more than 8GB per slot or a different pin count should look elsewhere.
1.35V DDR3L voltage requirement
The single specification that decides compatibility is the 1.35V DDR3L rating. Only platforms that explicitly support DDR3L at this voltage will operate correctly; standard 1.5V DDR3-only systems may not boot or could run unstable.
Priekšrocības
- 8GB capacity adds headroom for multitasking and large files
- DDR3L 1600MHz speed delivers fast data transfer rates
- 35V low-voltage operation reduces power draw and heat
- 204-pin SO-DIMM form factor fits standard laptop memory slots
- CL11 latency timing supports responsive system performance
Specifikācijas
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Jautājumi par šo preci
How do I install this 204-pin DDR3L SODIMM and what step is often missed?
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, press firmly until the side clips click, then verify 1600 MHz speed in BIOS.
What maintenance or replacement will this 8 GB module need later?
No scheduled maintenance is required; keep the contacts clean and ensure the laptop cooling vents stay clear so the 1.35 V module operates within its thermal limits.
What limit appears first under sustained heavy workloads?
The CL11 latency at 1600 MHz sets the throughput ceiling; prolonged max-bandwidth tasks will hit that timing boundary before voltage or temperature becomes a factor.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
