BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
8GB DDR3L SODIMM replacement for Kingston HX316LS9IBK2/16 KAS-N3CL/8G KCP3L16SD8/8 KN2M64-ETF KTA-MB1600L/8G KTL-TP3CL/8G MSI16D3LS1KBG/8G at 1600 MHz 1.35V CL11
This 8GB module uses 204-pin DDR3L technology at 1600MHz with CL11 latency and 1.35V operation. It is built for laptops, notebooks and all-in-one systems that accept low-voltage DDR3 SO-DIMM memory. The unbuffered, non-ECC design fits standard consumer platforms from both AMD and Intel.
The part matches Kingston references such as KTL-TP3CL/8G, KTA-MB1600L/8G and KCP3L16SD8/8, making it a direct swap for those specific kits. Systems that require ECC, registered DIMMs, or voltages other than 1.35V cannot use this module. Buyers needing more than 8GB per slot or a different pin count should look elsewhere.
The single specification that decides compatibility is the 1.35V DDR3L rating. Only platforms that explicitly support DDR3L at this voltage will operate correctly; standard 1.5V DDR3-only systems may not boot or could run unstable.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Power off the laptop, remove the battery if accessible, open the memory compartment, align the notch on the module with the slot key, press firmly until the side clips click, then verify 1600 MHz speed in BIOS.
No scheduled maintenance is required; keep the contacts clean and ensure the laptop cooling vents stay clear so the 1.35 V module operates within its thermal limits.
The CL11 latency at 1600 MHz sets the throughput ceiling; prolonged max-bandwidth tasks will hit that timing boundary before voltage or temperature becomes a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?