NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
8GB DDR4 2133MHz desktop memory module with CL15 latency and 1.2V operation
This A-Tech module provides eight gigabytes of DDR4 memory running at 2133MHz with CL15 latency. It is built as a non-ECC unbuffered DIMM using major-brand chips and operates at the standard 1.2V. The stick suits desktop owners who need a straightforward capacity increase for everyday multitasking.
The 288-pin form factor slots into any desktop motherboard that accepts DDR4 UDIMMs. Because it is unbuffered and non-ECC, it works with mainstream consumer platforms without requiring registered-memory support. The single 8GB stick leaves additional slots free for future expansion if the board has more than one DIMM socket.
This module serves as a direct replacement for the listed Crucial part numbers. The upgrade makes sense when a system currently runs less than 8GB or when a matching stick is needed to complete a dual-channel pair. Verifying the motherboard’s supported speed and maximum capacity beforehand ensures the new RAM will be recognised at its rated 2133MHz.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
CL15 is the rated CAS latency at 2133 MHz; sustained performance will follow this timing as long as the motherboard runs the module at its specified 1.20 V and the memory controller supports DDR4-2133.
The DIMM operates at the standard 1.20 V DDR4 voltage with no active cooling; it produces minimal heat and no audible noise under continuous use.
A motherboard with a DDR4 288-pin DIMM slot that supports 2133 MHz unbuffered non-ECC memory at 1.20 V.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?