NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
8GB DDR4 2133MHz desktop memory module with CL15 latency and 1.2V operation
This A-Tech module provides eight gigabytes of DDR4 memory running at 2133MHz with CL15 latency. It is built as a non-ECC unbuffered DIMM using major-brand chips and operates at the standard 1.2V. The stick suits desktop owners who need a straightforward capacity increase for everyday multitasking.
The 288-pin form factor slots into any desktop motherboard that accepts DDR4 UDIMMs. Because it is unbuffered and non-ECC, it works with mainstream consumer platforms without requiring registered-memory support. The single 8GB stick leaves additional slots free for future expansion if the board has more than one DIMM socket.
This module serves as a direct replacement for the listed Crucial part numbers. The upgrade makes sense when a system currently runs less than 8GB or when a matching stick is needed to complete a dual-channel pair. Verifying the motherboard’s supported speed and maximum capacity beforehand ensures the new RAM will be recognised at its rated 2133MHz.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
CL15 is the rated CAS latency at 2133 MHz; sustained performance will follow this timing as long as the motherboard runs the module at its specified 1.20 V and the memory controller supports DDR4-2133.
The DIMM operates at the standard 1.20 V DDR4 voltage with no active cooling; it produces minimal heat and no audible noise under continuous use.
A motherboard with a DDR4 288-pin DIMM slot that supports 2133 MHz unbuffered non-ECC memory at 1.20 V.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?