OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
8GB DDR4 2133MHz desktop memory module with CL15 latency and 1.2V operation
This A-Tech module provides eight gigabytes of DDR4 memory running at 2133MHz with CL15 latency. It is built as a non-ECC unbuffered DIMM using major-brand chips and operates at the standard 1.2V. The stick suits desktop owners who need a straightforward capacity increase for everyday multitasking.
The 288-pin form factor slots into any desktop motherboard that accepts DDR4 UDIMMs. Because it is unbuffered and non-ECC, it works with mainstream consumer platforms without requiring registered-memory support. The single 8GB stick leaves additional slots free for future expansion if the board has more than one DIMM socket.
This module serves as a direct replacement for the listed Crucial part numbers. The upgrade makes sense when a system currently runs less than 8GB or when a matching stick is needed to complete a dual-channel pair. Verifying the motherboard’s supported speed and maximum capacity beforehand ensures the new RAM will be recognised at its rated 2133MHz.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| Tested Frequency | 2133 |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
CL15 is the rated CAS latency at 2133 MHz; sustained performance will follow this timing as long as the motherboard runs the module at its specified 1.20 V and the memory controller supports DDR4-2133.
The DIMM operates at the standard 1.20 V DDR4 voltage with no active cooling; it produces minimal heat and no audible noise under continuous use.
A motherboard with a DDR4 288-pin DIMM slot that supports 2133 MHz unbuffered non-ECC memory at 1.20 V.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟