Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR4 RDIMM module with gold contacts and black chips on a 288-pin board

A-Tech

A-Tech 8GB DDR4 2133MHz ECC RDIMM 1Rx8 Server Memory

SKU CH-HA15-1EHWN

An 8 GB DDR4-2133 ECC registered DIMM with CL15 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8 GB capacity adds headroom for virtualization workloads
  • DDR4 2133 MHz speed matches PC4-17000 server platforms
  • ECC RDIMM registered design protects data integrity
  • 1Rx8 single-rank layout simplifies memory-channel population
  • 2 V standard voltage keeps power draw low

8GB DDR4 2133MHz ECC RDIMM Server Memory

This 8GB DDR4 module runs at 2133MHz with CL15 latency and 1.20V operation. It is a registered ECC DIMM built with a 1Rx8 configuration using Micron chipset components. The 288-pin form factor fits standard DDR4 server and workstation slots.

Suited for servers and workstations requiring

This module fits systems that specifically call for DDR4 2133MHz RDIMM modules with ECC and registered buffering. It is not for desktop PCs that accept only unbuffered non-ECC UDIMMs. It is also not for platforms needing higher speeds, larger capacities per slot, or different rank configurations.

Verify your system supports DDR4 2133MHz

Check the motherboard or server documentation for qualified memory lists that include 1Rx8 registered modules at this speed. Confirm the platform accepts 1.20V DDR4 DIMMs and that the memory controller supports ECC functionality. Ensure the 288-pin DIMM slot is the correct physical interface before ordering.

Priekšrocības

  • 8 GB capacity adds headroom for virtualization workloads
  • DDR4 2133 MHz speed matches PC4-17000 server platforms
  • ECC RDIMM registered design protects data integrity
  • 1Rx8 single-rank layout simplifies memory-channel population
  • 2 V standard voltage keeps power draw low

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF1G72AZ-2G1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMTA9ASF1G72AZ-2G1

Jautājumi par šo preci

Does my server motherboard need a 288-pin DDR4 DIMM slot to accept this module?

Yes, the module is a 288-pin DDR4 DIMM designed for server and workstation boards that support registered ECC memory.

Can I install this 1Rx8 registered ECC RDIMM alongside existing unbuffered non-ECC DIMMs in the same system?

No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC modules; the memory controller requires all installed DIMMs to share the same registered ECC configuration.

How do I confirm the module is running at 2133 MT/s with CL15 latency after installation?

Check the BIOS memory information or a system utility such as CPU-Z; it should report DDR4-2133, PC4-17000, CAS latency 15, and 1.20 V operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.