Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green rectangular DDR4 RDIMM module with gold contacts and black chips on a 288-pin board

A-Tech

A-Tech 8GB DDR4 2133MHz ECC RDIMM 1Rx8 Server Memory

SKU CH-HA15-1EHWN

An 8 GB DDR4-2133 ECC registered DIMM with CL15 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8 GB capacity adds headroom for virtualization workloads
  • DDR4 2133 MHz speed matches PC4-17000 server platforms
  • ECC RDIMM registered design protects data integrity
  • 1Rx8 single-rank layout simplifies memory-channel population
  • 2 V standard voltage keeps power draw low

8GB DDR4 2133MHz ECC RDIMM Server Memory

This 8GB DDR4 module runs at 2133MHz with CL15 latency and 1.20V operation. It is a registered ECC DIMM built with a 1Rx8 configuration using Micron chipset components. The 288-pin form factor fits standard DDR4 server and workstation slots.

Suited for servers and workstations requiring

This module fits systems that specifically call for DDR4 2133MHz RDIMM modules with ECC and registered buffering. It is not for desktop PCs that accept only unbuffered non-ECC UDIMMs. It is also not for platforms needing higher speeds, larger capacities per slot, or different rank configurations.

Verify your system supports DDR4 2133MHz

Check the motherboard or server documentation for qualified memory lists that include 1Rx8 registered modules at this speed. Confirm the platform accepts 1.20V DDR4 DIMMs and that the memory controller supports ECC functionality. Ensure the 288-pin DIMM slot is the correct physical interface before ordering.

I korthet

  • 8 GB capacity adds headroom for virtualization workloads
  • DDR4 2133 MHz speed matches PC4-17000 server platforms
  • ECC RDIMM registered design protects data integrity
  • 1Rx8 single-rank layout simplifies memory-channel population
  • 2 V standard voltage keeps power draw low

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF1G72AZ-2G1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMTA9ASF1G72AZ-2G1

Frågor om den här produkten

Does my server motherboard need a 288-pin DDR4 DIMM slot to accept this module?

Yes, the module is a 288-pin DDR4 DIMM designed for server and workstation boards that support registered ECC memory.

Can I install this 1Rx8 registered ECC RDIMM alongside existing unbuffered non-ECC DIMMs in the same system?

No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC modules; the memory controller requires all installed DIMMs to share the same registered ECC configuration.

How do I confirm the module is running at 2133 MT/s with CL15 latency after installation?

Check the BIOS memory information or a system utility such as CPU-Z; it should report DDR4-2133, PC4-17000, CAS latency 15, and 1.20 V operation.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.