BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
An 8 GB DDR4 2400 MHz SO-DIMM laptop memory module with CL17 latency and 1.2 V operation, compatible with HP part numbers 863484-800, Z9H56AA and Z9H56AT
This A-Tech module adds 8GB of DDR4 memory to compatible HP laptops and all-in-one systems. It uses the 260-pin SO-DIMM form factor and runs at 2400 MHz with CL17 latency at the standard 1.20V. The module is built with major-brand chips and tested for reliable operation.
Buyers needing to raise total memory by 8GB in a system that accepts DDR4 SO-DIMMs will find this module appropriate. It is not suited to devices that require ECC or registered memory, nor to platforms limited to lower DDR4 speeds. Systems with no free SO-DIMM slot cannot use it without removing existing memory.
The decisive parameter is the DDR4 2400 (PC4-19200) speed grade combined with CL17 timing and 1.20V operation. A system must support this exact speed, latency and voltage in a 260-pin unbuffered non-ECC SO-DIMM for the module to function correctly.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module operates at DDR4 2400 speed with CL17 latency and 1.20V voltage. When mixed with slower memory, the system typically runs all modules at the lowest common speed, so the 2400 MHz module will downclock to match the existing one.
After installing the 260-pin SODIMM, check the BIOS or use a system information tool to confirm 8GB capacity, DDR4 type, and 2400 MHz speed (PC4-19200). The CAS latency should show CL17 and voltage 1.20V.
The package contains one 8GB DDR4 2400 MHz CL17 260-pin SODIMM module. No additional cables, brackets, or tools are required for installation in a compatible laptop SO-DIMM slot.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?