BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
An 8 GB DDR4 2400 MHz SO-DIMM laptop memory module with CL17 latency and 1.2 V operation, compatible with HP part numbers 863484-800, Z9H56AA and Z9H56AT
This A-Tech module adds 8GB of DDR4 memory to compatible HP laptops and all-in-one systems. It uses the 260-pin SO-DIMM form factor and runs at 2400 MHz with CL17 latency at the standard 1.20V. The module is built with major-brand chips and tested for reliable operation.
Buyers needing to raise total memory by 8GB in a system that accepts DDR4 SO-DIMMs will find this module appropriate. It is not suited to devices that require ECC or registered memory, nor to platforms limited to lower DDR4 speeds. Systems with no free SO-DIMM slot cannot use it without removing existing memory.
The decisive parameter is the DDR4 2400 (PC4-19200) speed grade combined with CL17 timing and 1.20V operation. A system must support this exact speed, latency and voltage in a 260-pin unbuffered non-ECC SO-DIMM for the module to function correctly.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
The module operates at DDR4 2400 speed with CL17 latency and 1.20V voltage. When mixed with slower memory, the system typically runs all modules at the lowest common speed, so the 2400 MHz module will downclock to match the existing one.
After installing the 260-pin SODIMM, check the BIOS or use a system information tool to confirm 8GB capacity, DDR4 type, and 2400 MHz speed (PC4-19200). The CAS latency should show CL17 and voltage 1.20V.
The package contains one 8GB DDR4 2400 MHz CL17 260-pin SODIMM module. No additional cables, brackets, or tools are required for installation in a compatible laptop SO-DIMM slot.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?