Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 8GB DDR4 2666 ECC SODIMM CL19 1.2V 1Rx8 laptop RAM

SKU CH-YWCE-9BPJJ

8 GB DDR4 ECC SODIMM at 2666 MHz with CL19 latency and 1.2 V operation for compatible laptops and microservers

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

CAS Latency CL19

  • ECC protection prevents data corruption in critical workloads
  • 2V JEDEC standard voltage reduces power draw
  • Single-rank 1Rx8 layout simplifies memory controller timing
  • 260-pin SO-DIMM form factor fits laptop and microserver slots
  • CL19 latency at 2666 MHz delivers responsive multitasking

8GB DDR4 2666 ECC SODIMM for microservers

This A-Tech module provides 8GB of DDR4 memory at 2666 MHz with ECC error correction. It uses the 260-pin SO-DIMM form factor and runs at the standard 1.2V JEDEC voltage. The single-rank 1Rx8 design targets systems that require unbuffered ECC memory for data integrity.

Suited for ECC-capable laptops.

Buyers whose platforms do not support ECC unbuffered SODIMMs cannot use this module. It is not for systems limited to non-ECC memory or those requiring registered DIMMs. The fixed CL19 latency and 2666 MHz speed also exclude builds that demand higher frequencies or lower timings.

Handles typical multitasking

The single module fills one slot, leaving room for expansion if the board has additional sockets. Capacity runs out when workloads exceed 8GB, such as large virtualisation sets or heavy database caches. ECC protection covers single-bit errors but does not increase the physical memory ceiling.

Priekšrocības

  • ECC protection prevents data corruption in critical workloads
  • 2V JEDEC standard voltage reduces power draw
  • Single-rank 1Rx8 layout simplifies memory controller timing
  • 260-pin SO-DIMM form factor fits laptop and microserver slots
  • CL19 latency at 2666 MHz delivers responsive multitasking

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 1Rx8 PC4-21300 ECC SODIMM
Part NumberNE-SS-0572
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

My laptop only has one SO-DIMM slot — will this single 8 GB 260-pin module work on its own?

Yes, the module is a single 8 GB stick with a 260-pin DDR4 SO-DIMM form factor, so it installs in one slot and provides the full capacity without needing a matched pair.

I plan to keep my existing non-ECC DDR4 stick — what happens when I add this 1Rx8 ECC module?

Mixing ECC and non-ECC memory typically disables error correction on both modules, and the system will run at the lower of the two speeds with the looser timing.

After installing the module, how can I confirm the ECC function is actually active?

Enter the BIOS or UEFI and look for an ECC status line showing enabled, or run a system-information tool that reports ECC capability as active for the installed memory.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.