We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

A-Tech

A-Tech 8GB DDR4 2666 ECC SODIMM CL19 1.2V 1Rx8 laptop RAM

SKU CH-YWCE-9BPJJ

8 GB DDR4 ECC SODIMM at 2666 MHz with CL19 latency and 1.2 V operation for compatible laptops and microservers

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes

Capacity 8GB

Speed DDR4 2666 (PC4 21300)

CAS Latency CL19

  • ECC protection prevents data corruption in critical workloads
  • 2V JEDEC standard voltage reduces power draw
  • Single-rank 1Rx8 layout simplifies memory controller timing
  • 260-pin SO-DIMM form factor fits laptop and microserver slots
  • CL19 latency at 2666 MHz delivers responsive multitasking

8GB DDR4 2666 ECC SODIMM for microservers

This A-Tech module provides 8GB of DDR4 memory at 2666 MHz with ECC error correction. It uses the 260-pin SO-DIMM form factor and runs at the standard 1.2V JEDEC voltage. The single-rank 1Rx8 design targets systems that require unbuffered ECC memory for data integrity.

Suited for ECC-capable laptops.

Buyers whose platforms do not support ECC unbuffered SODIMMs cannot use this module. It is not for systems limited to non-ECC memory or those requiring registered DIMMs. The fixed CL19 latency and 2666 MHz speed also exclude builds that demand higher frequencies or lower timings.

Handles typical multitasking

The single module fills one slot, leaving room for expansion if the board has additional sockets. Capacity runs out when workloads exceed 8GB, such as large virtualisation sets or heavy database caches. ECC protection covers single-bit errors but does not increase the physical memory ceiling.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • 2V JEDEC standard voltage reduces power draw
  • Single-rank 1Rx8 layout simplifies memory controller timing
  • 260-pin SO-DIMM form factor fits laptop and microserver slots
  • CL19 latency at 2666 MHz delivers responsive multitasking

Specifications

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM
ModelA-Tech 8GB 1Rx8 PC4-21300 ECC SODIMM
Part NumberNE-SS-0572
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

My laptop only has one SO-DIMM slot — will this single 8 GB 260-pin module work on its own?

Yes, the module is a single 8 GB stick with a 260-pin DDR4 SO-DIMM form factor, so it installs in one slot and provides the full capacity without needing a matched pair.

I plan to keep my existing non-ECC DDR4 stick — what happens when I add this 1Rx8 ECC module?

Mixing ECC and non-ECC memory typically disables error correction on both modules, and the system will run at the lower of the two speeds with the looser timing.

After installing the module, how can I confirm the ECC function is actually active?

Enter the BIOS or UEFI and look for an ECC status line showing enabled, or run a system-information tool that reports ECC capability as active for the installed memory.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.