NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
8GB DDR5 4800 desktop DIMM with CL40 latency and 1.10V operation for AMD and Intel systems
This A-Tech 8GB DDR5 4800 DIMM is a non-ECC unbuffered memory upgrade built for desktop systems. It uses major-brand chips tested at 4800 MT/s with CL40 latency and runs at the standard 1.10V. The module matches Dell part numbers AB883073 and SNP29NJ4C/8G for direct replacement scenarios.
The 288-pin DDR5 form factor slots into a compatible motherboard DIMM socket without adapters or cables. Installation requires a platform that supports DDR5 memory; the module frees an additional slot when used as a single 8GB stick. Verify your system’s qualified vendor list before purchase to confirm compatibility.
At 1.10V the stick draws the baseline DDR5 voltage, keeping power draw and heat output low during everyday workloads. Passive cooling from case airflow is sufficient for normal use; no active fan or heatsink is required on the module itself. The low voltage helps maintain quiet, stable operation in typical desktop environments.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the module is listed as a compatible equivalent for those Dell part numbers and uses the standard 288-pin DDR5 DIMM form factor.
The module is rated for 4800 MT/s at CL40 and 1.10 V, matching the standard DDR5 base frequency for most current desktop platforms.
It is an unbuffered non-ECC UDIMM, so it can be paired with other DDR5 UDIMMs of the same voltage and speed, but you should verify your motherboard's qualified vendor list for best results.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?