OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
8GB DDR5 4800 desktop DIMM with CL40 latency and 1.10V operation for AMD and Intel systems
This A-Tech 8GB DDR5 4800 DIMM is a non-ECC unbuffered memory upgrade built for desktop systems. It uses major-brand chips tested at 4800 MT/s with CL40 latency and runs at the standard 1.10V. The module matches Dell part numbers AB883073 and SNP29NJ4C/8G for direct replacement scenarios.
The 288-pin DDR5 form factor slots into a compatible motherboard DIMM socket without adapters or cables. Installation requires a platform that supports DDR5 memory; the module frees an additional slot when used as a single 8GB stick. Verify your system’s qualified vendor list before purchase to confirm compatibility.
At 1.10V the stick draws the baseline DDR5 voltage, keeping power draw and heat output low during everyday workloads. Passive cooling from case airflow is sufficient for normal use; no active fan or heatsink is required on the module itself. The low voltage helps maintain quiet, stable operation in typical desktop environments.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, the module is listed as a compatible equivalent for those Dell part numbers and uses the standard 288-pin DDR5 DIMM form factor.
The module is rated for 4800 MT/s at CL40 and 1.10 V, matching the standard DDR5 base frequency for most current desktop platforms.
It is an unbuffered non-ECC UDIMM, so it can be paired with other DDR5 UDIMMs of the same voltage and speed, but you should verify your motherboard's qualified vendor list for best results.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?