Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
A green circuit board with M.2 slot, flat flex cable, mounted 2 TB SSD, rubber feet and metal standoffs

AAAwave

AAAwave NVMe Base M.2 HAT PCIe Extension with 2 TB SSD

SKU CH-R483-99TB9

Adds 2 TB NVMe storage to Raspberry Pi 5 via PCIe extension board with M.2 slot and flex cable

  • Adds fast NVMe storage to Raspberry Pi 5
  • Includes 2 TB MP33 M.2 2280 SSD
  • PCIe extension via flat flex cable
  • Supports 2230 to 2280 M-key drives
  • Mounts under Pi with standoffs and rubber feet

NVMe Base for Raspberry Pi 5

This PCIe extension board adds M-key NVMe storage to a Raspberry Pi 5. It supports M.2 2230 to 2280 drives and mounts directly under the single-board computer. The bundle includes a 2 TB MP33 SSD so the system is ready to boot from fast storage immediately. Builders who need a different capacity or form factor must source their own drive.

Bundled SSD and mounting hardware

The included 2 TB MP33 drive eliminates the need to purchase and install a separate NVMe module. Rubber feet, an M2 bolt with nuts, and two lengths of M2.5 standoffs and bolts let you secure the drive and the base board in a compact stack. A flat-flex PCIe cable connects the HAT to the Pi 5 without bulky ribbons. Users who prefer a different cable length or drive brand cannot swap those parts without buying extras.

Build quality and daily connectivity

The PCB follows Raspberry Pi PIP design guidelines for long-term OS support and mechanical compatibility. Four rubber feet keep the assembly stable on a desk when the Pi is used as a file server or media centre. Pass-through mounting holes allow another HAT to sit on top, preserving the GPIO header for additional peripherals. Firmware dated 2023-12-06 or newer is required for full PCIe functionality.

Priekšrocības

  • Adds fast NVMe storage to Raspberry Pi 5
  • Includes 2 TB MP33 M.2 2280 SSD
  • PCIe extension via flat flex cable
  • Supports 2230 to 2280 M-key drives
  • Mounts under Pi with standoffs and rubber feet

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

How is the 2 TB MP33 SSD secured to the HAT for long-term use?

The bundle includes an M2 bolt and two nuts that fasten the 2280 drive to the M-key slot on the NVMe Base PCB.

What bandwidth ceiling appears first when the PCIe flat-flex cable runs at full speed all day?

The Raspberry Pi 5 PCIe 2.0 x1 lane limits sustained throughput to roughly 4 GB/s regardless of the SSD rating.

Does the board add audible noise or extra heat when the Pi 5 boots from the NVMe drive continuously?

No fan or active cooling is included; the SSD and PCB run passively, so only the Pi's own thermal profile changes.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.