Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
A green circuit board with M.2 slot, flat flex cable, mounted 2 TB SSD, rubber feet and metal standoffs

AAAwave

AAAwave NVMe Base M.2 HAT PCIe Extension with 2 TB SSD

SKU CH-R483-99TB9

Adds 2 TB NVMe storage to Raspberry Pi 5 via PCIe extension board with M.2 slot and flex cable

  • Adds fast NVMe storage to Raspberry Pi 5
  • Includes 2 TB MP33 M.2 2280 SSD
  • PCIe extension via flat flex cable
  • Supports 2230 to 2280 M-key drives
  • Mounts under Pi with standoffs and rubber feet

NVMe Base for Raspberry Pi 5

This PCIe extension board adds M-key NVMe storage to a Raspberry Pi 5. It supports M.2 2230 to 2280 drives and mounts directly under the single-board computer. The bundle includes a 2 TB MP33 SSD so the system is ready to boot from fast storage immediately. Builders who need a different capacity or form factor must source their own drive.

Bundled SSD and mounting hardware

The included 2 TB MP33 drive eliminates the need to purchase and install a separate NVMe module. Rubber feet, an M2 bolt with nuts, and two lengths of M2.5 standoffs and bolts let you secure the drive and the base board in a compact stack. A flat-flex PCIe cable connects the HAT to the Pi 5 without bulky ribbons. Users who prefer a different cable length or drive brand cannot swap those parts without buying extras.

Build quality and daily connectivity

The PCB follows Raspberry Pi PIP design guidelines for long-term OS support and mechanical compatibility. Four rubber feet keep the assembly stable on a desk when the Pi is used as a file server or media centre. Pass-through mounting holes allow another HAT to sit on top, preserving the GPIO header for additional peripherals. Firmware dated 2023-12-06 or newer is required for full PCIe functionality.

Poudarki

  • Adds fast NVMe storage to Raspberry Pi 5
  • Includes 2 TB MP33 M.2 2280 SSD
  • PCIe extension via flat flex cable
  • Supports 2230 to 2280 M-key drives
  • Mounts under Pi with standoffs and rubber feet

Specifikacije

Za ta izdelek še ni objavljenih specifikacij.

Vprašanja o tem izdelku

How is the 2 TB MP33 SSD secured to the HAT for long-term use?

The bundle includes an M2 bolt and two nuts that fasten the 2280 drive to the M-key slot on the NVMe Base PCB.

What bandwidth ceiling appears first when the PCIe flat-flex cable runs at full speed all day?

The Raspberry Pi 5 PCIe 2.0 x1 lane limits sustained throughput to roughly 4 GB/s regardless of the SSD rating.

Does the board add audible noise or extra heat when the Pi 5 boots from the NVMe drive continuously?

No fan or active cooling is included; the SSD and PCB run passively, so only the Pi's own thermal profile changes.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.