Acumen Disc AD04-OP300 1-to-4 Flatbed Hard Drive Duplicator
- Hard Drive Duplicat…
- Black
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Acumen Disc
Standalone duplicator copies up to 19 SATA drives at 300MB/s with DoD-compliant erasure
Data Transfer Rate 300MB/s
The Acumen Disc AD19-OP300 is a standalone flatbed duplicator that copies up to nineteen 2.5-inch SATA hard drives or solid-state drives simultaneously. It operates without a host computer, using an onboard Athena controller and 128 MB buffer to sustain 300 MB/s per slot. A 16 x 2 LCD and status LEDs provide progress feedback during duplication or sanitisation tasks.
Suited for environments that require DoD-compliant erasure with seven selectable modes including 3-pass and 7-pass 5220.22-M standards. The unit accepts both 2.5-inch and 3.5-inch SATA drives without adapters and runs continuously from 115-230 V AC power. Buyers who need support for interfaces other than SATA, or who require a portable single-drive copier, should look elsewhere.
Each of the nineteen target bays maintains a maximum transfer rate of 300 MB/s during copy or erase operations, ensuring consistent performance across all slots. This figure determines whether the duplicator meets the time window for high-volume deployment or evidence processing workflows.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Model | Acumen Disc HDD Flatbed |
| Part Number | AD19-OP300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 19 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The Athena Controller and 128M buffer are solid-state components with no moving parts; no scheduled maintenance or replacement is required for them.
The 300MB/s SATA transfer ceiling is reached before any internal bottleneck, so sustained throughput cannot exceed that rate.
The duplicator operates continuously without a cool-down period, indicating the power supply and chassis handle full-day loads within normal thermal and acoustic limits.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?