Acumen Disc AD04-OP300 1-to-4 Flatbed Hard Drive Duplicator
- Hard Drive Duplicat…
- Black
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Acumen Disc
Standalone duplicator copies up to 19 SATA drives at 300MB/s with DoD-compliant erasure
Data Transfer Rate 300MB/s
The Acumen Disc AD19-OP300 is a standalone flatbed duplicator that copies up to nineteen 2.5-inch SATA hard drives or solid-state drives simultaneously. It operates without a host computer, using an onboard Athena controller and 128 MB buffer to sustain 300 MB/s per slot. A 16 x 2 LCD and status LEDs provide progress feedback during duplication or sanitisation tasks.
Suited for environments that require DoD-compliant erasure with seven selectable modes including 3-pass and 7-pass 5220.22-M standards. The unit accepts both 2.5-inch and 3.5-inch SATA drives without adapters and runs continuously from 115-230 V AC power. Buyers who need support for interfaces other than SATA, or who require a portable single-drive copier, should look elsewhere.
Each of the nineteen target bays maintains a maximum transfer rate of 300 MB/s during copy or erase operations, ensuring consistent performance across all slots. This figure determines whether the duplicator meets the time window for high-volume deployment or evidence processing workflows.
| Brand | Acumen Disc |
|---|---|
| Type | Hard Drive Duplicator |
| Model | Acumen Disc HDD Flatbed |
| Part Number | AD19-OP300 |
| Panel Color | Black |
| Operating Type | Standalone |
| Display | 16 x 2 LCD |
| Connector | SATA |
| Target | 1 to 19 |
| Buffer Memory | 128M |
| Controller | Athena Controller |
| Supported Media | SATA Hard Drive Disk / SATA Solid State Drives |
| Data Transfer Rate | 300MB/s |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The Athena Controller and 128M buffer are solid-state components with no moving parts; no scheduled maintenance or replacement is required for them.
The 300MB/s SATA transfer ceiling is reached before any internal bottleneck, so sustained throughput cannot exceed that rate.
The duplicator operates continuously without a cool-down period, indicating the power supply and chassis handle full-day loads within normal thermal and acoustic limits.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?