Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Rectangular desktop duplicator with card slots, USB port, optical drive and LCD display

Acumen Disc

Acumen Disc CrossOver BD 1-to-1 Duplicator AD01-MMPBD

SKU CH-36HN-P0WYA

Copies flash cards or optical discs to blank discs or other flash media at up to 52× CD, 24× DVD and 16× BD speeds, with standalone 20×2 LCD control

  • TypeMultimedia Duplicator
  • Target1 to 1
  • ControllerAcumen Disc
  • Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD
  • Data Transfer Rate33MB/s
  • CD-R52X

Targets 1 to 1

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

Option Crossover BD

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • Copy flash media to Blu-ray at 16× speed for archival backup
  • Duplicate CD or DVD discs at up to 52× / 24× directly
  • Convert USB, CF, SD or MS cards to another flash type
  • Standalone operation with 20×2 LCD — no PC required
  • Bi-directional media conversion between flash cards and optical discs

Acumen Disc CrossOver BD Duplicator

The Acumen Disc CrossOver BD is a standalone 1-to-1 multimedia duplicator that copies between flash memory cards, USB drives and optical discs. It suits users who need bi-directional media conversion without a host computer. The unit reads from CompactFlash, Secure Digital, Memory Stick and USB sources. It writes to the same flash formats or to CD, DVD and Blu-ray media.

Build and daily operation

A 20 x 2 LCD panel and four front-access card slots plus a USB port give direct control over copy jobs. One internal reader handles source discs while one writer burns target discs at up to 52X for CD-R and 16X for BD-R. The standalone design means no software installation or PC connection is required. English, Spanish, French and Japanese menus guide the operator through each task.

Deciding specification

The maximum data transfer rate is 33 MB/s, which sets the practical speed ceiling for every copy operation regardless of the source or destination media type. This rate applies to flash-to-flash, flash-to-disc and disc-to-disc jobs alike. Buyers who need higher sustained throughput for large-volume archiving should consider that limitation.

Priekšrocības

  • Copy flash media to Blu-ray at 16× speed for archival backup
  • Duplicate CD or DVD discs at up to 52× / 24× directly
  • Convert USB, CF, SD or MS cards to another flash type
  • Standalone operation with 20×2 LCD — no PC required
  • Bi-directional media conversion between flash cards and optical discs

Specifikācijas

BrandAcumen Disc
ModelCrossOver BD
Part NumberAD01-MMPBD
TypeMultimedia Duplicator
Target1 to 1
ControllerAcumen Disc
Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD) / Memory Stick (MS)
Data Transfer Rate33MB/s
CD-R52X
DVD+R24X
DVD+RW8X
DVD-R24X
DVD-RW8X
BD-R16X
BD-RE2X
BD-R DL8X
Data Source ROM1 Reader Rom for Source Reading
Data Destination Burner1 Writers for Disc to Disc Copy
Language SupportEnglish / Spanish / French / Japanese
Display20 x 2 LCD
Operating TypeStandalone
Load TypeTray
Power SupplyAC: 115-230 V, 50/60 Hz

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What flash-memory slots and USB port does the AD01-MMPBD provide for source media?

The media deck includes one CompactFlash slot, one Secure Digital slot, one Memory Stick slot and one USB drive slot; any single card or drive in the upper deck can be read as the source.

What physical space and power does the duplicator need to operate?

It is a standalone desktop unit with a built-in 20 x 2 LCD; no host computer, extra software or external interface cables are required — only mains power.

How do I start a card-to-disc copy and what common step is missed?

Insert the source card in the upper deck slot, load a blank CD, DVD or BD in the writer, select the MEDIA-to-DISC function on the LCD menu and press Start; the step often missed is choosing the correct target media type before pressing Start.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.