Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular desktop duplicator with card slots, USB port, optical drive and LCD display

Acumen Disc

Acumen Disc CrossOver BD 1-to-1 Duplicator AD01-MMPBD

SKU CH-36HN-P0WYA

Copies flash cards or optical discs to blank discs or other flash media at up to 52× CD, 24× DVD and 16× BD speeds, with standalone 20×2 LCD control

  • TypeMultimedia Duplicator
  • Target1 to 1
  • ControllerAcumen Disc
  • Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD
  • Data Transfer Rate33MB/s
  • CD-R52X

Targets 1 to 1

Přeškrtnuté varianty existují, ale zde nejsou skladem.

Option Crossover BD

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Copy flash media to Blu-ray at 16× speed for archival backup
  • Duplicate CD or DVD discs at up to 52× / 24× directly
  • Convert USB, CF, SD or MS cards to another flash type
  • Standalone operation with 20×2 LCD — no PC required
  • Bi-directional media conversion between flash cards and optical discs

Acumen Disc CrossOver BD Duplicator

The Acumen Disc CrossOver BD is a standalone 1-to-1 multimedia duplicator that copies between flash memory cards, USB drives and optical discs. It suits users who need bi-directional media conversion without a host computer. The unit reads from CompactFlash, Secure Digital, Memory Stick and USB sources. It writes to the same flash formats or to CD, DVD and Blu-ray media.

Build and daily operation

A 20 x 2 LCD panel and four front-access card slots plus a USB port give direct control over copy jobs. One internal reader handles source discs while one writer burns target discs at up to 52X for CD-R and 16X for BD-R. The standalone design means no software installation or PC connection is required. English, Spanish, French and Japanese menus guide the operator through each task.

Deciding specification

The maximum data transfer rate is 33 MB/s, which sets the practical speed ceiling for every copy operation regardless of the source or destination media type. This rate applies to flash-to-flash, flash-to-disc and disc-to-disc jobs alike. Buyers who need higher sustained throughput for large-volume archiving should consider that limitation.

Přednosti

  • Copy flash media to Blu-ray at 16× speed for archival backup
  • Duplicate CD or DVD discs at up to 52× / 24× directly
  • Convert USB, CF, SD or MS cards to another flash type
  • Standalone operation with 20×2 LCD — no PC required
  • Bi-directional media conversion between flash cards and optical discs

Specifikace

BrandAcumen Disc
ModelCrossOver BD
Part NumberAD01-MMPBD
TypeMultimedia Duplicator
Target1 to 1
ControllerAcumen Disc
Supported MediaUSB Flash Pen Drive / CompactFlash (CF) / Secure Digital (SD) / Memory Stick (MS)
Data Transfer Rate33MB/s
CD-R52X
DVD+R24X
DVD+RW8X
DVD-R24X
DVD-RW8X
BD-R16X
BD-RE2X
BD-R DL8X
Data Source ROM1 Reader Rom for Source Reading
Data Destination Burner1 Writers for Disc to Disc Copy
Language SupportEnglish / Spanish / French / Japanese
Display20 x 2 LCD
Operating TypeStandalone
Load TypeTray
Power SupplyAC: 115-230 V, 50/60 Hz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What flash-memory slots and USB port does the AD01-MMPBD provide for source media?

The media deck includes one CompactFlash slot, one Secure Digital slot, one Memory Stick slot and one USB drive slot; any single card or drive in the upper deck can be read as the source.

What physical space and power does the duplicator need to operate?

It is a standalone desktop unit with a built-in 20 x 2 LCD; no host computer, extra software or external interface cables are required — only mains power.

How do I start a card-to-disc copy and what common step is missed?

Insert the source card in the upper deck slot, load a blank CD, DVD or BD in the writer, select the MEDIA-to-DISC function on the LCD menu and press Start; the step often missed is choosing the correct target media type before pressing Start.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.