ADATA LEGEND 710 512GB M.2 2280 internal SSD ALEG-710-512GCS
- Internal Solid Stat…
- Consumer
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ADATA
M.2 2280 NVMe SSD with 256GB of 3D NAND storage, reaching 1900 MB/s reads and 1000 MB/s writes while an integrated heatsink keeps temperatures in check
Model LEGEND 700
The ADATA LEGEND 700 256GB is an M.2 2280 internal solid state drive built on 3D NAND and a PCIe 3.0 x4 interface with NVMe 1.3. It delivers sequential reads up to 1900 MBps and writes up to 1000 MBps. An integrated heat sink helps manage temperatures during workloads.
This drive targets aspiring or amateur content creators editing photos, video or illustrations. It supports Host Memory Buffer and AES 256-bit encryption. The 80 TBW endurance rating means users with sustained heavy write demands should consider higher-capacity or DRAM-equipped alternatives.
The on-board heat sink reduces operating temperatures effectively across the 0°C to 70°C range. LDPC ECC and NVMe 1.3 maintain data integrity during long sessions. MTBF of 1500000 hours and 1500G shock resistance back reliability for typical creator workloads.
| Brand | ADATA |
|---|---|
| Series | LEGEND 700 |
| Model | ALEG-700-256GCS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 1900 MBps |
| Max Sequential Write | Up to 1000 MBps |
| Terabytes Written (TBW) | 80TB |
| MTBF | 1,500,000 hours |
| HeatSink | with HeatSink |
| Features | * Ultra-fast PCIe Gen3 x4 interface * R/W speed up to 1,900/1,000MB/s * NVMe 1.3 support * Heat sink reduces temp. effectively * Supports Host Memory Buffer(HMB) * Advanced hardware LDPC ECC Technology * AES 256-bit encryption support * Great upgrade option for creators * For aspiring or amateur content creators looking to edit photos/videos, illustrate, and other tasks. * Free software: SSD Toolbox and Migration Utility |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Sūtījuma svars | 0.05 kg |
| Sūtījuma izmēri | 131 × 105 × 17 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
The drive uses the standard M.2 2280 form factor; the integrated heatsink adds minimal height so it fits most laptops, but verify your chassis clearance before installing.
It uses Host Memory Buffer instead of onboard DRAM, which delivers responsive performance for typical creative tasks and general use.
ADATA supplies a free SSD Toolbox and Migration Utility to simplify cloning and ongoing drive health monitoring.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?