ADATA LEGEND 710 512GB M.2 2280 internal SSD ALEG-710-512GCS
- Internal Solid Stat…
- Consumer
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ADATA
M.2 2280 NVMe SSD with 256GB of 3D NAND storage, reaching 1900 MB/s reads and 1000 MB/s writes while an integrated heatsink keeps temperatures in check
Model LEGEND 700
The ADATA LEGEND 700 256GB is an M.2 2280 internal solid state drive built on 3D NAND and a PCIe 3.0 x4 interface with NVMe 1.3. It delivers sequential reads up to 1900 MBps and writes up to 1000 MBps. An integrated heat sink helps manage temperatures during workloads.
This drive targets aspiring or amateur content creators editing photos, video or illustrations. It supports Host Memory Buffer and AES 256-bit encryption. The 80 TBW endurance rating means users with sustained heavy write demands should consider higher-capacity or DRAM-equipped alternatives.
The on-board heat sink reduces operating temperatures effectively across the 0°C to 70°C range. LDPC ECC and NVMe 1.3 maintain data integrity during long sessions. MTBF of 1500000 hours and 1500G shock resistance back reliability for typical creator workloads.
| Brand | ADATA |
|---|---|
| Series | LEGEND 700 |
| Model | ALEG-700-256GCS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 1900 MBps |
| Max Sequential Write | Up to 1000 MBps |
| Terabytes Written (TBW) | 80TB |
| MTBF | 1,500,000 hours |
| HeatSink | with HeatSink |
| Features | * Ultra-fast PCIe Gen3 x4 interface * R/W speed up to 1,900/1,000MB/s * NVMe 1.3 support * Heat sink reduces temp. effectively * Supports Host Memory Buffer(HMB) * Advanced hardware LDPC ECC Technology * AES 256-bit encryption support * Great upgrade option for creators * For aspiring or amateur content creators looking to edit photos/videos, illustrate, and other tasks. * Free software: SSD Toolbox and Migration Utility |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Lähetyspaino | 0.05 kg |
| Pakkauksen mitat | 131 × 105 × 17 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive uses the standard M.2 2280 form factor; the integrated heatsink adds minimal height so it fits most laptops, but verify your chassis clearance before installing.
It uses Host Memory Buffer instead of onboard DRAM, which delivers responsive performance for typical creative tasks and general use.
ADATA supplies a free SSD Toolbox and Migration Utility to simplify cloning and ongoing drive health monitoring.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?