ADATA
ADATA Ultimate SU630 240GB 2.5" SATA internal SSD
A 2.5 inch SATA internal SSD with 240GB capacity using 3D QLC NAND and SLC caching for sequential speeds up to 520 MBps read and 450 MBps write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity240GB
- Memory Components3D QLC
- InterfaceSATA III
- Faster boot and load times with up to 520 MB/s sequential read
- Smooth file saves and installs backed by up to 450 MB/s sequential write
- Responsive multitasking from up to 30,000 random read IOPS
- Reliable long-term storage with 1,500,000-hour MTBF rating
- Drop-in 2.5-inch SATA upgrade for laptops and desktops
240GB SATA internal SSD for everyday PCs
The ADATA Ultimate SU630 is a 2.5-inch internal solid-state drive with a 240GB capacity. It connects through a standard SATA III interface and uses 3D QLC NAND flash. The drive targets desktop or laptop users who want a simple storage upgrade from a mechanical hard disk.
2.5-inch form factor with SATA connector
The drive measures 100.45 x 69.85 x 7mm and weighs 47.5g, fitting any standard 2.5-inch bay or caddy. A SATA data and power connector provides broad compatibility with existing cables and motherboard ports. No additional mounting hardware or adapters are required for typical installations.
Replaces a 2.5-inch hard drive for faster boot
Sequential reads reach up to 520 MBps and writes up to 450 MBps, while random reads hit 30,000 IOPS and random writes 65,000 IOPS. The jump is worth it when the system feels sluggish on a spinning disk and the workload fits within 240GB. SLC caching and LDPC ECC help sustain performance during everyday file transfers.
Priekšrocības
- Faster boot and load times with up to 520 MB/s sequential read
- Smooth file saves and installs backed by up to 450 MB/s sequential write
- Responsive multitasking from up to 30,000 random read IOPS
- Reliable long-term storage with 1,500,000-hour MTBF rating
- Drop-in 2.5-inch SATA upgrade for laptops and desktops
Specifikācijas
| Brand | ADATA |
|---|---|
| Series | Ultimate SU630 |
| Model | ASU630SS-240GQ-R |
| Part Number | SU630 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 240GB |
| Memory Components | 3D QLC |
| Interface | SATA III |
| Protocol | SATA |
| Connector | SATA |
| Cache | 240 unknown_modifier |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 450 MBps |
| 4KB Random Read | Up to 30,000 IOPS |
| 4KB Random Write | Up to 65,000 IOPS |
| MTBF | 1,500,000 hours |
| Features | 3D QLC NAND Flash for higher affordability Big capacity up to 960GB Advanced hardware LDPC ECC technology Supports SLC Caching for improved performance Free software: SSD Toolbox and Migration Utility Supports S.M.A.R.T., TRIM Command, and NCQ |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G / 0.5 ms |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.45mm |
| Weight | 47.50g |
| Package Content | No |
Jautājumi par šo preci
What real-world speed limit does the SATA III interface impose on this drive?
The SATA III interface caps sequential throughput at 6 Gb/s, so the drive’s quoted 520 MB/s read and 450 MB/s write are the practical ceiling.
Will the 2.5 inch 7 mm form factor fit my laptop’s drive bay?
The drive measures 100.45 x 69.85 x 7 mm and weighs 47.5 g, matching the standard 2.5 inch 7 mm bay used in most laptops and desktops.
Do I need to enable anything in BIOS before cloning my old drive?
Set the SATA controller to AHCI mode, then use the included Migration Utility to clone; skipping the AHCI switch is the step most people miss.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
