Alphacool AlphaTube HF Flexible Tubing 10/13 mm 1 m Ultra Clear PVC 17494
- Tubing
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Alphacool
UV-reactive white PVC tubing with 10 mm inner and 13 mm outer diameter, rated for 80 °C and 2 bar working pressure
Length 1m
This PVC tubing connects pumps, radiators, blocks and reservoirs in a custom liquid-cooling loop. The 10 mm inner diameter and 13 mm outer diameter fit standard G1/4 fittings. A 65–70 A-Shore hardness keeps the tube flexible for routing yet stiff enough to resist kinking on tight bends. One metre length suits most single-loop builds.
Swap out aged, discoloured or incorrectly sized hose when rebuilding or expanding a loop. The upgrade is worth it when the old tubing has lost plasticiser, shows clouding or cannot meet the 2 bar working pressure and 8 bar burst rating. UV White colour also changes the loop aesthetic without new components.
Rated for continuous use between –10 °C and 80 °C at up to 2 bar working pressure with an 8 bar burst margin. Comfortably feeds typical single-pump configurations and common radiator counts. Runs out of headroom in multi-pump serial setups or extreme sub-ambient chillers that exceed the temperature or pressure envelope.
| Type | Tubing |
|---|
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Use compression fittings rated for 10 mm ID and 13 mm OD, or 3/8 inch ID and 1/2 inch OD barbs with matching clamps.
Warm the PVC gently with warm water, push it fully onto the fitting until it seats against the collar, and avoid bending sharper than the tubing's natural curve.
Inspect every six to twelve months; replace if the material yellows, stiffens beyond the 65-70 A-Shore range, or shows micro-cracks near fittings.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?