Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Coiled white PVC tube 10mm ID 13mm OD 1m UV reactive

Alphacool

Alphacool AlphaTube HF Tubing 10/13mm 1m UV White PVC

SKU CH-5VFY-DQ36Q

UV-reactive white PVC tubing with 10 mm inner and 13 mm outer diameter, rated for 80 °C and 2 bar working pressure

  • TypeTubing

Length 1m

Color UV White

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

Tubing for Custom Water-Cooling Loops

This PVC tubing connects pumps, radiators, blocks and reservoirs in a custom liquid-cooling loop. The 10 mm inner diameter and 13 mm outer diameter fit standard G1/4 fittings. A 65–70 A-Shore hardness keeps the tube flexible for routing yet stiff enough to resist kinking on tight bends. One metre length suits most single-loop builds.

Replaces Worn or Mismatched Tubing

Swap out aged, discoloured or incorrectly sized hose when rebuilding or expanding a loop. The upgrade is worth it when the old tubing has lost plasticiser, shows clouding or cannot meet the 2 bar working pressure and 8 bar burst rating. UV White colour also changes the loop aesthetic without new components.

Handles Standard Loop Pressures and Temperatures

Rated for continuous use between –10 °C and 80 °C at up to 2 bar working pressure with an 8 bar burst margin. Comfortably feeds typical single-pump configurations and common radiator counts. Runs out of headroom in multi-pump serial setups or extreme sub-ambient chillers that exceed the temperature or pressure envelope.

Kohokohdat

  • UV White glows under UV light for striking aesthetics
  • 10 mm inner diameter and 13 mm outer diameter fit standard 3/8" ID and 1/2" OD fittings
  • Flexible PVC with 65-70 A-Shore hardness bends easily without kinking
  • Rated for -10 °C to 80 °C working temperature range
  • 1 metre length suits compact or custom loop layouts

Tekniset tiedot

TypeTubing

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What fitting sizes match the 10 mm inner and 13 mm outer diameter of this tubing?

Use compression fittings rated for 10 mm ID and 13 mm OD, or 3/8 inch ID and 1/2 inch OD barbs with matching clamps.

How do I install the tubing without kinking it during tight bends?

Warm the PVC gently with warm water, push it fully onto the fitting until it seats against the collar, and avoid bending sharper than the tubing's natural curve.

When should I plan to replace this tubing in a loop running near the 80 °C limit?

Inspect every six to twelve months; replace if the material yellows, stiffens beyond the 65-70 A-Shore range, or shows micro-cracks near fittings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.