Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Chrome Y-shaped liquid-cooling connector with rotatable 45-degree outer thread and two inner threads, 44mm long, 18mm wide, 33mm high

Alphacool

Alphacool Eiszapfen Y-Connector 45° Rotatable G1/4 Outer to 2x Inner Thread Chrome 17400

SKU CH-DAS2-ER5ZJ

A 45-degree rotatable Y-connector with one G1/4 outer and two inner threads, made from chrome-plated brass measuring 44 by 18 by 33 millimetres

  • ColorChrome
  • FeaturesAlphacool's Eiszapfen connector series is the high-end execu
  • Splits one port into two with 45° rotatable Y-connector
  • Fits 95% of components via standard G1/4 outer thread
  • Chrome coating resists chipping through special surface binding
  • Compact 44mm length suits tight loop routing
  • Brass construction ensures durable leak-free connections

Alphacool Eiszapfen Y-Connector 45° Chrome

This Alphacool Eiszapfen Y-connector splits a single G1/4 outer thread into two G1/4 inner threads at a fixed 45° angle. The rotatable outer thread allows precise alignment during custom loop assembly. It is built from brass with a durable chrome coating for corrosion resistance.

For builders splitting one port into two at an angle

Suits custom water-cooling loops that need a 45° branched connection from a component or radiator port. It is not for loops needing a straight in-line coupler, a different fixed angle, or a split into more than two branches.

G1/4 outer to dual G1/4 inner thread interface

The fitting provides one G1/4 outer thread compatible with 95% of water-cooling components and two G1/4 inner threads for compression fittings. This specific thread combination determines if it matches your hardware ports.

Priekšrocības

  • Splits one port into two with 45° rotatable Y-connector
  • Fits 95% of components via standard G1/4 outer thread
  • Chrome coating resists chipping through special surface binding
  • Compact 44mm length suits tight loop routing
  • Brass construction ensures durable leak-free connections

Specifikācijas

BrandAlphacool
Model1013367
ColorChrome
FeaturesAlphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!

Jautājumi par šo preci

Does the chrome finish hold up under continuous coolant flow and heat?

A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating.

What G1/4 fittings or tubing must I already have to connect this Y-connector?

The fitting has a 1/4" outer thread on one side and two 1/4" inner threads on the other, so you need G1/4 compression fittings or tubing with matching threads for each port.

Will the 45° rotatable design clear my existing rigid tubing runs in a tight loop?

The connector measures 44 mm long, 18 mm wide and 33 mm high with a 45° rotatable joint, allowing you to orient the two inner ports to fit around existing tubing.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.