Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Chrome Y-shaped liquid-cooling connector with rotatable 45-degree outer thread and two inner threads, 44mm long, 18mm wide, 33mm high

Alphacool

Alphacool Eiszapfen Y-Connector 45° Rotatable G1/4 Outer to 2x Inner Thread Chrome 17400

SKU CH-DAS2-ER5ZJ

A 45-degree rotatable Y-connector with one G1/4 outer and two inner threads, made from chrome-plated brass measuring 44 by 18 by 33 millimetres

  • ColorChrome
  • FeaturesAlphacool's Eiszapfen connector series is the high-end execu
  • Splits one port into two with 45° rotatable Y-connector
  • Fits 95% of components via standard G1/4 outer thread
  • Chrome coating resists chipping through special surface binding
  • Compact 44mm length suits tight loop routing
  • Brass construction ensures durable leak-free connections

Alphacool Eiszapfen Y-Connector 45° Chrome

This Alphacool Eiszapfen Y-connector splits a single G1/4 outer thread into two G1/4 inner threads at a fixed 45° angle. The rotatable outer thread allows precise alignment during custom loop assembly. It is built from brass with a durable chrome coating for corrosion resistance.

For builders splitting one port into two at an angle

Suits custom water-cooling loops that need a 45° branched connection from a component or radiator port. It is not for loops needing a straight in-line coupler, a different fixed angle, or a split into more than two branches.

G1/4 outer to dual G1/4 inner thread interface

The fitting provides one G1/4 outer thread compatible with 95% of water-cooling components and two G1/4 inner threads for compression fittings. This specific thread combination determines if it matches your hardware ports.

Prednosti

  • Splits one port into two with 45° rotatable Y-connector
  • Fits 95% of components via standard G1/4 outer thread
  • Chrome coating resists chipping through special surface binding
  • Compact 44mm length suits tight loop routing
  • Brass construction ensures durable leak-free connections

Špecifikácie

BrandAlphacool
Model1013367
ColorChrome
FeaturesAlphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!

Otázky k tomuto produktu

Does the chrome finish hold up under continuous coolant flow and heat?

A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating.

What G1/4 fittings or tubing must I already have to connect this Y-connector?

The fitting has a 1/4" outer thread on one side and two 1/4" inner threads on the other, so you need G1/4 compression fittings or tubing with matching threads for each port.

Will the 45° rotatable design clear my existing rigid tubing runs in a tight loop?

The connector measures 44 mm long, 18 mm wide and 33 mm high with a 45° rotatable joint, allowing you to orient the two inner ports to fit around existing tubing.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.