Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 90-degree revolvable barbed fitting with G1/4 thread and O-ring

Alphacool

Alphacool G1/4 13mm 90° Revolvable Barbed Fitting Deep Black 17139

SKU CH-YH0J-G3CPS

G1/4 90° revolvable barbed fitting for 13 mm tubing with O-ring in deep black finish

  • TypeFittings

Color/Size 13mm Black

  • High-flow inner diameter for unrestricted coolant movement
  • 90° revolvable design allows flexible tube routing
  • G1/4 thread with 13mm barbed connection fits standard tubing
  • Deep Black chromatised finish resists peeling and fading
  • Includes O-ring for a secure, leak-free seal

G1/4 90° Revolvable Fitting

The Alphacool 13mm barbed fitting connects soft tubing with a 13mm inner diameter to any component using a standard G1/4 thread. Its 90° revolvable design lets the elbow rotate freely after tightening, simplifying tube routing in tight loops. A deep black chromatised finish bonds to the brass body for lasting colour.

Builders needing a single 90° connection

This fitting suits custom loops that require one right-angled joint for 13mm ID tubing. It does not serve builds using smaller or larger tubing diameters, nor does it replace straight or multi-angle adapters. Buyers needing quick-disconnect or compression-style seals should look at other fitting types.

Sustained flow with minimal restriction

The wide inner bore maintains high flow rates during continuous pump operation, reducing pressure drop across the elbow. The revolvable joint stays aligned under vibration and thermal cycling, preventing kinks that would throttle coolant movement over long runs.

Priekšrocības

  • High-flow inner diameter for unrestricted coolant movement
  • 90° revolvable design allows flexible tube routing
  • G1/4 thread with 13mm barbed connection fits standard tubing
  • Deep Black chromatised finish resists peeling and fading
  • Includes O-ring for a secure, leak-free seal

Specifikācijas

TypeFittings

Citas šī modeļa versijas

Vēl 2 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What tubing inner diameter must I already have for the 13 mm barbed end to seal properly?

You need soft tubing with a 13 mm inner diameter; the barbed end is sized for that exact bore and the included O-ring seals against the G1/4 port.

Will the 90° revolvable elbow clear a radiator port that sits close to a motherboard heatsink?

The fitting rotates freely after tightening so you can orient the 90° bend away from nearby components, but the overall height is fixed by the 90° geometry.

How can I confirm the Deep Black finish is correctly seated and leak-free after installation?

Tighten the G1/4 thread until the O-ring compresses, then run the loop under pressure; no coolant should appear at the thread or barb junction.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.