Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black copper radiator, 284 by 80 by 60 mm, three 80 mm fan slots

Alphacool

Alphacool NexXxoS UT60 X-Flow 80mm Triple Radiator 60mm Black 14296

SKU CH-919M-3N3P8

Triple 80 mm copper radiator with X-Flow design and countersunk G1/4 ports for flexible 2U server mounting

  • TypeRadiator

Size 80mm

  • Copper construction maximises heat transfer for efficient cooling
  • X-Flow design routes coolant across all fins for optimised circulation
  • Countersunk G1/4 ports allow flexible mounting in tight spaces
  • Triple 80 mm fan layout fits standard 2U server racks
  • Compact 284 × 80 × 60 mm footprint suits dense builds

Alphacool NexXxoS UT60 X-Flow Triple Radiator

The Alphacool NexXxoS UT60 X-Flow is a full-copper liquid-cooling radiator built for 2U server racks. It measures 284 x 80 x 60 mm and accepts three single-sided or six double-sided 80 mm fans. G1/4 ports and countersunk screw plugs allow flexible loop routing. Model 14296 ships new in black.

Who this suits and who should look elsewhere

Builders assembling custom loops inside 2U rack enclosures with 80 mm fan mounts will fit this radiator directly. It is not for loops that need a different fan diameter or a thinner profile than 60 mm. Systems without 80 mm mounting points cannot use it without modification.

Copper construction and X-Flow layout

The radiator uses copper for fins, channels and the pre-chamber to maximise thermal conductivity. X-Flow routing runs coolant from one side to the other across all fins for even heat distribution. Multiple G1/4 inlets and outlets combined with countersunk plugs let you orient the unit as the build requires.

Priekšrocības

  • Copper construction maximises heat transfer for efficient cooling
  • X-Flow design routes coolant across all fins for optimised circulation
  • Countersunk G1/4 ports allow flexible mounting in tight spaces
  • Triple 80 mm fan layout fits standard 2U server racks
  • Compact 284 × 80 × 60 mm footprint suits dense builds

Specifikācijas

TypeRadiator

Citas šī modeļa versijas

Vēl 1 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the radiator in a 2U server rack and which step is often missed?

Mount the unit using the 284 mm length to fit the 2U space, then connect the G1/4 ports; the step often missed is removing the countersunk screw plugs from the unused inlets and outlets before pressurising the loop.

What maintenance will this copper radiator need over time?

Flush the loop annually with a non-corrosive coolant to prevent oxidation inside the copper channels, and inspect the G1/4 O-rings for wear during each drain.

What thermal limit appears first during sustained load on the X-Flow design?

The 60 mm core thickness restricts fin surface area, so coolant temperature rise becomes the limiting factor before the 80 mm fans reach maximum airflow.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.